MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Penetrating and Lock Lubricant (US); Penetrating Fluid (Canada) XL-1 (US); CXC-51-A (Canada) |
MATERIAL SPECIFICATIONS
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Ball Joint Deflection | |
| Lower | 0-0.2 mm (0-0.008 in) |
| Front Ride Height | |
| All vehicles | 3.3 mm (0.129 in) ± 8 mm (0.314 in) |
| Rear Ride Height | |
| All vehicles except Hybrid | 94.8 mm (3.732 in) ± 8 mm (0.314 in) |
| Hybrid vehicles | 88 mm (3.464 in) ± 8 mm (0.314 in) |
| Side-to-Side Lean (All Vehicles) | |
| Front | 0 mm (0 in) ± 10 mm (0.393 in) |
| Rear | 0 mm (0 in) ± 10 mm (0.393 in) |
| Tire Balance Weight | |
| Maximum balance weight (total of inner and outer wheel flange) | 140 g (5.0 oz) per wheel 70 g (2.5 oz) per flange |
| Tire Inflation | |
| Tires | See safety certification sticker on driver door jamb |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm | Lb-ft |
|---|---|---|
| Front Suspension | ||
| Strut upper mounting nuts | 40 | 30 |
| Tie-rod end jam nut | 40 | 30 |
| Rear Suspension | ||
| Wheel knuckle bolt | 150 | 111 |
TORQUE SPECIFICATIONS
ALIGNMENT SPECIFICATIONS
Note. All alignment specifications are with the vehicle fuel tank full.
| Item | LH | RH | Split |
|---|---|---|---|
| Front | |||
| Camber | 0.84° ± 0.50° | 0.84° ± 0.50° | 0.00° ± 0.70° |
| Caster | 1.60° ± 0.50° | 1.60° ± 0.50° | 0.00° ± 0.70° |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | 0.23° ± 0.23° | ||
| Rear | |||
| All Vehicles Except Hybrid | |||
| Camber | 0.00° ± 0.60° | 0.00° ± 0.70° | |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | 0.09° ± 0.15° | 0.09° ± 0.15° | 0.18° ± 0.20° |
| Hybrid Vehicles | |||
| Camber | 0.1° ± 0.60° | 0.1° ± 0.70° | |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | 0.06° ± 0.15° | 0.06° ± 0.15° | 0.12° ± 0.20° |
ALIGNMENT SPECIFICATIONS
See also:
• JACKING & LIFTING