GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Azimuth system check object position 1 (P1) and position 5 (P5) distance from sensor | 30 cm (12 in) |
| Azimuth system check object position 2 (P2) and position 4 (P4) distance from sensor | 91 cm (36 in) |
| Azimuth system check object position 3 (P3) distance from sensor | 152 cm (60 in) |
GENERAL SPECIFICATIONS
The parking aid system consists of the following
- Four ultrasonic parking aid sensors (located in the rear bumper)
- Parking Aid Module (PAM) (located in the RH rear quarter trim panel)
- Parking aid speaker (located on the PAM)
- Parking aid switch (located in the lower center instrument panel bezel)
The parking aid system sounds a warning to alert the driver of stationary objects near the rear bumper when REVERSE (R) is selected. The parking aid system assists the driver in detecting certain objects while the vehicle moves slowly in reverse at speeds less than 4.8 km/h (3 mph). The parking aid system may not detect angular or moving objects.
See also:
• JACKING & LIFTING