Uni-Body, Subframe and Mounting System: Removal & Installation Ford Escape I рестайлинг

Installation

1. With an assistant, position the rear subframe and install the bolts. To install, tighten to 115 Nm (85 lb-ft).
2. Install a new exhaust hanger on the subframe.
3. Position the 4 rear control arms into the subframe. Loosely install the bolts.
4. Install the rear axle assembly. For additional information, refer to «REAR DRIVE AXLE-DIFFERENTIAL»(ref-232188) .
5. Tighten the 4 rear control arms bolts. Tighten to 115 Nm (85 lb-ft).