GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| High Temperature Nickel Anti-Seize Lubricant XL-2 | ESE-M12A4-A |
| Catalytic Converter Manifold Flange | Maximum Warpage 0.76 mm (0.03 inch) |
| Maximum exhaust gas backpressure | 27.6 kPa (4 PSI) @ 2000 RPM |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| A/C compressor bolts | 25 |
| A/C compressor nut | 25 |
| Heat shield bolts | 10 |
| Exhaust catalytic converter nuts | 47 |
| Catalyst monitor sensor | 47 |
| Exhaust Y-pipe nuts (3.0L) | 47 |
| Exhaust manifold nuts (2.3L and Hybrid) | 47 |
| Exhaust manifold nuts (3.0L) | 25 |
| Exhaust flexible pipe nuts | 25 |
| Heated oxygen sensor | 47 |
| Heat shield clamps | 7 |
| Catalytic converter bracket bolts | 25 |
| Resonator nuts | 47 |
| U-bolt clamp assembly nuts | 47 |
| Exhaust gas recirculation (EGR) tube nut | 40 |
TORQUE SPECIFICATIONS
The exhaust system provides an exit for exhaust gases and reduces engine noise by passing exhaust gases through the catalytic converters, a muffler assembly and resonator. Rubber exhaust hanger insulators attach the exhaust system to the mounting hooks.
See also:
• JACKING AND LIFTING