GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Driveshaft runout | 0.89 mm (0.035 in) |
GENERAL SPECIFICATIONS
TIGHTENING TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Center bearing support nuts | 48 |
| Front driveshaft-to-transfer case bolts | 37 |
| Ground strap bolt | 40 |
| Universal joint cap bolts | 23 |
TIGHTENING TORQUE SPECIFICATIONS
| CAUTION | All driveshaft assemblies are balanced. If undercoating the vehicle, protect the driveshaft to prevent overspray of any undercoating material. |
| CAUTION | Manual and automatic transmission driveshafts are different. Make sure that the driveshaft being installed is compatible with the vehicle or damage to the vehicle may occur. |
The driveshaft has traditional balance weights attached (spot-welded) by the manufacturer.
See also:
• JACKING AND LIFTING