General Specifications
| Item | Specification |
|---|
| Premium Long-Life Grease XG-1-C | ESA-M1C75-B |
| Threadlock 262 E2FZ-19554-B | WSK-M2G351-A6 |
| Driveshaft runout | 0.89 mm (0.03 in) |
Torque Specifications
| Description | Nm |
|---|
| Front CV joint bolts | 40 |
| Center bearing mount nuts | 48 |
| Rear end universal joint caps bolts | 23 |
| Ground wire to body bolt | 40 |
| Driveshaft to power take off bolts | 37 |
| CAUTION | All driveshaft assemblies are balanced. If undercoating the vehicle, protect the driveshaft to prevent overspray of any undercoating material. |
| CAUTION | Manual and automatic transmission driveshafts are different. Make sure that the driveshaft being installed is compatible with the vehicle or damage to the vehicle may occur. |
The driveshaft has traditional balance weights attached (spot-welded) by the manufacturer.
