Home/Ford/Edge/Ford Edge I facelift (2010-2014)/Repair manual/Removal & Installation/Engine Emission Control System: Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Emission Control System: Specifications Ford Edge I facelift

SPECIFICATIONS

ItemSpecificationFill Capacity
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada) XO-5W20-QSP (US); CXO-5W20-LSP12 (Canada)WSS-M2C945-A

MATERIAL SPECIFICATIONS

DescriptionNm
Crankcase vent oil separator bolts10

TORQUE SPECIFICATIONS

Note. Do not permanently remove or render inoperative any part of the vehicle emission control system, including related hardware. Failure to comply may violate applicable state and federal laws.

Note. The vehicle emission vacuum routing diagrams are contained in the Description and Operation subsection of the Evaporative Emissions article. Refer to EVAPORATIVE EMISSIONS .

The engine emission control system consists of the PCV system.