SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) | WSS-M6C62-A or WSS-M6C65-A1 | 803-821 ml (1.70-1.74 pt) |
| High Temperature Nickel Anti-Seize Lubricant XL-2 | ESE-M12A4-A | |
| Metal Brake Parts Cleaner PM-4-A or PM-4-B (US); CPM-4 (Canada) |
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake disc minimum thickness | 26 mm (1.023 in) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 in) |
| Brake pad minimum thickness | 3.0 mm (0.118 in) |
GENERAL SPECIFICATIONS
| Description | Nm |
|---|---|
| Bleeder screw | 8 |
| Brake caliper anchor plate bolts | 133 |
| Brake caliper flow bolt | 25 |
| Brake caliper guide pin bolts | 88 |
| Brake flexible hose bracket bolt | 20 |
| Brake tube fitting | 17 |
TORQUE SPECIFICATIONS
The front disc brake system consists of the brake caliper, the disc brake pads, the anchor plate and the brake disc. The brake caliper is a single piston floating design. The brake caliper is mounted to the anchor plate by the caliper guide bolts. The brake caliper slides, or floats, on the caliper guide bolts. The brake is a cast, ventilated type brake disc. When mechanical force is applied by the driver to the brake pedal, the force is converted into hydraulic pressure by the master cylinder. The hydraulic force is directed to the disc brake calipers and transferred to the brake pads. The brake pads are then forced against the brake friction surfaces by the brake caliper pistons. The friction of the brake pads on the brake disc causes the slowing of wheel rotation and the vehicle.
Refer to BRAKE SYSTEM - GENERAL INFORMATION .