SPECIFICATIONS
| Description | Nm | Lb-ft | Lb-in |
|---|---|---|---|
| Catalytic converter-to-bracket nuts (2.0L Gasoline Turbocharged Direct Injection (GTDI)) | 25 | 18 | |
| Catalytic converter-to-turbocharger clamp | 15 | 133 | |
| Exhaust flexible pipe nuts | 40 | 30 | |
| Exhaust Y-pipe-to-LH catalytic converter manifold nuts | 40 | 30 | |
| Exhaust Y-pipe-to-muffler and tailpipe assembly nuts (3.7L) | 40 | 30 | |
| Exhaust Y-pipe-to-RH catalytic converter nuts | 40 | 30 | |
| LH catalytic converter manifold heat shield bolts | 12 | 106 | |
| LH catalytic converter manifold-to-cylinder head nuts | 25 | 18 | |
| LH catalytic converter manifold-to-cylinder head studs | 12 | 106 | |
| RH catalytic converter-to-exhaust manifold nuts (1) | |||
| RH catalytic converter-to-exhaust manifold studs | 25 | 18 | |
| Torca® clamp (2.0L Gasoline Turbocharged Direct Injection (GTDI)) | 54 | 40 | |
| Torca® clamp (3.5L) | 47 | 35 | |
| Worm gear clamp | 7 | 62 | |
| (1) Refer to the appropriate procedure. | |||
| (1) | Refer to the appropriate procedure. |
TORQUE SPECIFICATIONS
The exhaust system consists of
- a turbocharger-mounted catalytic converter (2.0L Gasoline Turbocharged Direct Injection (GTDI)).
- a one-piece LH catalytic converter manifold (3.5L and 3.7L).
- a RH exhaust manifold-mounted catalytic converter (3.5L and 3.7L).
- a exhaust flexible pipe (2.0L Gasoline Turbocharged Direct Injection (GTDI)).
- an exhaust Y-pipe with exhaust flexible pipe(s) (3.5L and 3.7L).
- a muffler and tailpipe assembly.
- isolators installed on the body and muffler hangers.
The exhaust system provides an exit for exhaust gases and reduces engine noise by passing exhaust gases through the catalytic converters, a muffler assembly and resonator. Rubber exhaust hanger isolators attach the exhaust system to the mounting hooks.
See also:
• JACKING & LIFTING
• AUTOMATIC TRANSMISSION - 6F50/6F55