Interior Lighting System: Removal & Installation Ford Edge I

REMOVAL AND INSTALLATION

Front

1. Pull down on the rear of the overhead console to remove the overhead console from the retaining clips. Disconnect the electrical connectors.
2. Release the 4 retaining clips and remove the lamp assembly from the overhead console.
3. Release the 6 retaining clips and remove the lens from the lamp assembly. NOTE: The bulbs can be pushed out from the backside of the lamp assembly. Replace the bulb(s) as necessary.
4. Remove the interior lamp lens.
5. Release the 2 retaining clips (through the access holes) and remove the interior lamp. Disconnect the electrical connector.
6. To install, reverse the removal procedure.