TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m.) | |
|---|---|---|
| Axle-To-Pivot Bracket Bolt | 110-148 (149-201) | |
| Axle-To-Radius Arm Bolt/Nut | 188-254 (255-344) | |
| Brake Rotor Shield Bolt | (1) | |
| Coil Spring Upper Retainer-To-Spring Seat Bolt | 19-26 (26-35) | |
| Jounce Bumper-To-Frame Bolt | 19-26 (26-35) | |
| Lower Ball Joint-To-Spindle Nut | 110-150 (149-203) | |
| Radius Arm-To-Rear Bracket Nut | 84-112 (114-152) | |
| Shock Absorber Lower Mount Nut | 50-68 (68-92) | |
| Shock Absorber Upper Mount Nut | 25-35 (34-47) | |
| Stabilizer Bar Retainer Mount Bolt | 15-21 (20-28) | |
| Tie Rod End-To-Spindle Nut | 57-75 (77-102) | |
| Upper Ball Joint Clamp Bolt | 65-87 (88-118) | |
| Wheel Lug Nuts | ||
| E150 | (2) 74-133 (100-180) | |
| E250 & E350 | (2) 126-170 (171-230) | |
| (1) Tighten to 62-88 INCH lbs. (7-10 N.m). (2) Failure to retighten wheel lug nuts at 500 miles after installation, may result in wheel coming loose and loss of vehicle control. | ||
| (1) | Tighten to 62-88 INCH lbs. (7-10 N.m). |
| (2) | Failure to retighten wheel lug nuts at 500 miles after installation, may result in wheel coming loose and loss of vehicle control. |
TORQUE SPECIFICATIONS