Home/Ford/Econoline E350/Ford Econoline E350 (1997-1998)/Repair manual/Charging System/Charging System - Generator - Motorcraft: Specifications
Contents Wiring diagrams Section: Charging System All sections

Charging System - Generator - Motorcraft: Specifications Ford Econoline E350

Battery Specifications

Measured VoltageState of ChargeSpecific Gravity
12.60100%1.265
12.4575%1.230
12.3050%1.200
12.1525%1.170

Torque Specifications

DescriptionNmLb/FtLb/In
Primary Battery Cable Bracket Nut, 4.2L and 4.6L7-962-80
Primary Battery Cable Bracket Nut, 5.4L and 6.8L26-3419-25
Starter Motor/Solenoid B+ Terminal Nut11-138-10
Starter Motor/Solenoid Enable Terminal Nut, Gasoline4-635-53
Starter Motor/Solenoid Enable Terminal Nut, Diesel327
Starter Motor/Solenoid Ground Nut, Gasoline20-2515-18
Starter Motor/Solenoid Ground Nut, Diesel19-2614-19
Starter Motor/Solenoid Ground Stud22-2816-21
Starter Motor/Solenoid Mounting Bolts22-2816-21
Negative Battery Ground Stud to Engine, Diesel34-4625-34
Negative Battery Ground Screw to Frame, Diesel8-971-80
Battery Cable Bracket Screw, Diesel22-2816-21
Battery Cable Bracket Nut, Diesel22-2816-21
Primary Positive and Negative Battery Terminal Nuts, Gasoline6-853-71
Primary Positive and Negative Battery Terminal Nuts, Diesel13-1710-13
Primary Positive Battery Cable Nut to Secondary Battery, Diesel23-3117-23
Primary Battery Cable Ground Eyelet Nut7-962-80
Auxiliary or Secondary Positive and Negative Battery Terminal Nuts13-1710-13
Auxiliary or Secondary Case Cover Bolts6-753-62
Auxiliary Battery Ground Cable Bolt to Frame12-159-11
Auxiliary or Secondary Battery Harness to Frame Clip Screws12-159-11
Auxiliary or Secondary Battery Case to Frame Bolts36-4625-34
Auxiliary or Secondary Battery Safety Strap Bolts26-3419-25
Auxiliary or Secondary Battery Hold-Down Wedge Screw5.5-749-62
Starter Motor Relay Mounting Screws7-962-80
Starter Motor Relay B+ and Enable Terminal Nuts7-962-80
Auxiliary Battery Relay Mounting Screws7-962-80
Auxiliary Battery Relay Terminal Nuts7-962-80
Battery Tray Bolts22-3416-25
Air Cleaner Bracket Bolts, 7.3L Diesel7-962-80

Generator Specifications

ItemSpecifications
GeneratorMotorcraft
Current Output (Minimum)95 Amp - 76 Amps @ 2000 rpm 130 Amp - 87 Amps @ 2000 rpm
Ratio (Generator Pulley Revolutions: Engine Revolutions)4.2L - 2.79:1 4.6L, 5.4L, 6.8L - 2.72:1 7.3L DIT - 2.51:1
Voltage RegulatorInternal Rear Mount
DescriptionNmLb/FtLb/In
Pulley Nut82-13561-99
Generator Regulator and Brushes Mounting Screws2.3-3.420-30
Brush and Terminal Holder Retaining Screws2.8-4.025-35
Generator B+ Terminal Nut, 4.2L and 7.3L Diesel9-1280-106
Generator B+ Terminal Nut, 4.6L, 5.4L and 6.8L7-962-80
Generator Mounting Bolts, 4.2L and 7.3L Diesel41-5430-40
Generator Mounting Bolts, 4.6L, 5.4L and 6.8L22-2816-21
Upper Intake Plenum to Generator Bracket Bolts, 4.6L, 5.4L and 6.8L9-1280-106