Home/Ford/Econoline E250/Ford Econoline E250 (2012-2013)/Repair manual/Module Communications Network/High Speed Controller Area Network (HS-CAN) Modules

Contents

Section: Module Communications Network

General information

Network Termination

Gateway Module

Principles of Operation

High Speed Controller Area Network (HS-CAN) Modules

Medium Speed Controller Area Network (MS-CAN) Modules

Controller Area Network (CAN) Fault Tolerance

Controller Area Network (CAN) Multiplex Messages

Inspection and Verification

DTC Charts

Symptom Chart

Pinpoint Test A: The PCM Does Not Respond To The Scan Tool

Normal Operation

Pinpoint Test B: The ABS Module Does Not Respond To The Scan Tool

Pinpoint Test C: The Instrument Panel Cluster (IPC) Does Not Respond To The Scan Tool

PINPOINT TEST C: THE IPC DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test D: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool

PINPOINT TEST D: THE RCM DOES NOT RESPOND TO THE SCAN TOOL

PINPOINT TEST E: THE TBC MODULE DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test F: The Smart Junction Box (SJB) Does Not Respond To The Scan Tool

PINPOINT TEST F: THE SJB DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test G: The Audio Control Module (ACM) Does Not Respond To The Scan Tool

PINPOINT TEST G: THE ACM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test H: The Parking Aid Module (PAM) Does Not Respond To The Scan Tool

PINPOINT TEST H: THE PAM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test I: The Satellite Digital Audio Receiver System (SDARS) Module Does Not Respond To The Scan Tool

PINPOINT TEST I: THE SDARS MODULE DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test J: The Global Positioning System Module (GPSM) Does Not Respond To The Scan Tool

PINPOINT TEST J: THE GPSM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test K: The Accessory Protocol Interface Module (APIM) Does Not Respond To The Scan Tool

PINPOINT TEST K: THE APIM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test L: No Medium Speed Controller Area Network (MS-CAN) Communication, All Modules Are Not Responding

PINPOINT TEST L: NO MS-CAN COMMUNICATION, ALL MODULES ARE NOT RESPONDING

PINPOINT TEST M: INTERMITTENT NO MS-CAN COMMUNICATION, COMMUNICATION CAN BE INTERMITTENTLY ESTABLISHED

Pinpoint Test N: No High Speed Controller Area Network (HS-CAN) Communication, All Modules Are Not Responding

PINPOINT TEST N: NO HS-CAN COMMUNICATION, ALL MODULES ARE NOT RESPONDING

PINPOINT TEST O: INTERMITTENT NO HS-CAN COMMUNICATION, COMMUNICATION CAN BE INTERMITTENTLY ESTABLISHED

Pinpoint Test P: No Power To The Scan Tool

All sections

High Speed Controller Area Network (HS-CAN) Modules Ford Econoline E250

Module Communications Network

High Speed Controller Area Network (HS-CAN) Modules

The following modules are on the HS-CAN

ABS module (except cutaway chassis)
Accessory Protocol Interface Module (APIM) (if equipped)
Instrument Panel Cluster (IPC)
PCM
Restraints Control Module (RCM)
Trailer Brake Control (TBC) (if equipped)
Telematics module (if equipped)