Home ReviewsRefund
Home/Ford/Econoline E250/Ford Econoline E250 (1997-2012)/Repair manual/Removal & Installation/Electronic Engine Controls- Gasoline Engines: Other
Contents Wiring diagrams Section: Removal & Installation All sections

Electronic Engine Controls- Gasoline Engines: Other Ford Econoline E250

Removal & Installation 4 illustrations

Fuel Rail Pressure (FRP) Sensor

ItemSpecification
SAE 5W-20 Motor Oil XO-5W20-QSPWSS-M2C153-H

MATERIAL

Scheme 52

Scheme 52
Scheme 52

Scheme 53

Scheme 53
Scheme 53

Scheme 54

Scheme 54
Scheme 54

Scheme 55

Scheme 55
Scheme 55
  1. Release the fuel system pressure. For additional information, refer to «FUEL SYSTEM-GENERAL INFORMATION-GASOLINE & DIESEL»(ref-210160) .
  2. Disconnect the battery ground cable. For additional information, refer to «BATTERY, MOUNTING AND CABLES»(ref-210181) .
  3. Disconnect the fuel rail pressure (FRP) sensor electrical connector and the vacuum hose.
  4. Remove the bolts and the FRP sensor.
  5. Disconnect the FRP sensor electrical connector and the vacuum hose.
  6. Remove the bolts and the FRP sensor.
  7. To install, reverse the removal procedure.

More articles — Electronic Engine Controls- Gasoline Engines