Home/Ford/Contour/Ford Contour I (1994-1997)/Repair manual/General Servicing - All Makes/A/c System General Servicing: Component Locations
Contents Wiring diagrams Section: General Servicing - All Makes All sections

A/c System General Servicing: Component Locations Ford Contour I

SERVICE VALVE LOCATIONS

For service valve locations, see SERVICE VALVE LOCATIONS (CARS) or SERVICE VALVE LOCATIONS (TRUCKS & VANS) table.

VehicleHighLow
Continental(5)(6)
Contour & Mystique
2.0L Engine(7)(8)
2.5L Engine(7)(9)
Cougar & Thunderbird(7)(3)
Crown Victoria, Grand Marquis & Town Car(7)(3)
Escort & Tracer(1)(2)
Mark VIII(7)(9)
Mustang(7)(3)
Probe(4)(3)
Sable & Taurus(7)(10)
(1) In discharge (high pressure) line. (2) In suction (low pressure) line. (3) On accumulator-drier or filter-drier. (4) On liquid line extension, in front of condenser. (5) On condenser to evaporator tube, to right of radiator. In the stowed position, it is clipped to the condenser. (6) On suction line, at evaporator core outlet tube. (7) On A/C manifold and tube, between A/C compressor and condenser. (8) On suction line, between evaporator core and accumulator-drier. (9) On A/C manifold and tube, between A/C compressor and accumulator-drier. (10) On A/C manifold and tube, between A/C compressor and evaporator.
(1)In discharge (high pressure) line.
(2)In suction (low pressure) line.
(3)On accumulator-drier or filter-drier.
(4)On liquid line extension, in front of condenser.
(5)On condenser to evaporator tube, to right of radiator. In the stowed position, it is clipped to the condenser.
(6)On suction line, at evaporator core outlet tube.
(7)On A/C manifold and tube, between A/C compressor and condenser.
(8)On suction line, between evaporator core and accumulator-drier.
(9)On A/C manifold and tube, between A/C compressor and accumulator-drier.
(10)On A/C manifold and tube, between A/C compressor and evaporator.

SERVICE VALVE LOCATIONS

VehicleHighLow
Aerostar, Explorer & Ranger(1)(3)
Bronco & "F" Series(1)(2)
"E" Series(1)(2)
Villager(4)(5)
Windstar(1)(3)
(1) In discharge (high pressure) line. (2) In suction (low pressure) line. (3) On accumulator-drier. (4) On high pressure line extension from A/C compressor. (5) On suction line, near accumulator-drier.
(1)In discharge (high pressure) line.
(2)In suction (low pressure) line.
(3)On accumulator-drier.
(4)On high pressure line extension from A/C compressor.
(5)On suction line, near accumulator-drier.

SERVICE VALVE LOCATIONS