PARAMETER IDENTIFICATION VALUES
| PID/Test Condition | PID Value (1) | Pinpoint Test |
|---|
| AP |
| Accelerator Released | (2) 0.6 Volt | E |
| Wide Open Throttle | (2) 3.8 Volts | E |
| IVS |
| Accelerator Released | Off | AA |
| Wide Open Throttle | On | AA |
| BOO |
| Brake Pedal Depressed | On | K |
| Brake Pedal Released | Off | K |
| BPA |
| Brake Pedal Depressed | On | P |
| Brake Pedal Released | Off | P |
| CPP (3) |
| Clutch Pedal Depressed | On | N |
| Clutch Pedal Released | Off | N |
| PBA |
| Parking Brake On | On | Q |
| Parking Brake Off | Off | Q |
| CPP (4) |
| OD Cancel Button Depressed | On | AK |
| OD Cancel Button Released | Off | AK |
| TR (4) |
| Gear Selector In "P" | P/N | AM |
| Gear Selector In "R" | REV | AM |
| Gear Selector In "N" | NTRL | AM |
| Gear Selector In OD | OD | AM |
| Gear Selector In OD With OD Cancel Light On | DRIVE | AM |
| Gear Selector In L2 | MAN2 | AM |
| Gear Selector In L1 | MAN1 | AM |
| TCIL (4) |
| Push OD Cancel (Latch) | On | AK |
| Push OD Cancel (Unlatch) | Off | AK |
| SCCS M (5) |
| Speed Control Off | Off | F |
| Speed Control On | On | F |
| Set/Accel | Set A/C | F |
| Coast | Coast | F |
| Resume | Resume | F |
| CRUISE |
| (Speed Control/When Driving Only) Off | Off | F |
| On | STNDBY | F |
| Set/Accel (After Pressing) | Tap Up | F |
| Coast (After Pressing) | Tap Down | F |
| 4x4L |
| Step 4x4H Or 2H | Off | AD |
| Step 4x4L | On | AD |
| ACCS (6) |
| Max/Norm A/C Or Mix/DEF With A/C Clutch On | On | AE |
| Floor, Vent or A/C Clutch Off | Off | AE |
| (1) If PID value is not as specified, perform appropriate PINPOINT TEST. (2) Voltage is approximate (3) Manual transmission only. (4) E4OD automatic transmission only. (5) Speed control. (6) A/C controls. |
| (1) | If PID value is not as specified, perform appropriate PINPOINT TEST. |
| (2) | Voltage is approximate |
| (3) | Manual transmission only. |
| (4) | E4OD automatic transmission only. |
PARAMETER IDENTIFICATION VALUES
