TORQUE SPECIFICATIONS - TRANSFER CASE
| Application | Ft. Lbs. (N.m) |
|---|
| Drain & Filler Plug | 10-14 (14-19) |
| Transfer Case-To-Transmission Extension Housing Bolt | 25-43 (34-58) |
| (1) Tighten bolts to specification in sequence. (Схема №1) |
| (1) | Tighten bolts to specification in sequence. (Схема №1) |
TORQUE SPECIFICATIONS (TRANSFER CASE)
TORQUE SPECIFICATIONS - AUTOMATIC TRANSMISSION
| Application | Ft. Lbs. (N.m) |
|---|
| AOD |
| Crossmember-To-Frame Bolt | 43-57 (58-77) |
| Oil Pan Bolt | (1) |
| Torque Converter-To-Drive Plate Nut | 20-34 (27-46) |
| Transmission Mount-To-Crossmember Nut | 60-80 (81-109) |
| Transmission Mount-To-Transmission Extension Housing Bolt | 60-80 (81-109) |
| Transmission-To-Engine Bolt | 40-50 (54-68) |
| AODE-W/4R70W |
| Crossmember-To-Frame Bolt | 70-100 (95-136) |
| Parking Brake Assembly Filler Plug | 25-30 (34-41) |
| Parking Brake Assembly-To-Transmission Bolt (2) | 25-43 (34-58) |
| Torque Converter-To-Drive Plate Nut | 20-34 (27-46) |
| Transmission Mount-To-Crossmember Nut | 64-81 (87-110) |
| Transmission-To-Engine Bolt | 40-50 (54-68) |
| C6 |
| Crossmember-To-Frame Bolt | 40-60 (54-81) |
| Oil Pan Bolt | 10-12 (14-16) |
| Torque Converter-To-Drive Plate Nut | 20-30 (27-41) |
| Transmission Mount-To-Crossmember Nut | 50-70 (68-95) |
| Transmission Mount-To-Transmission Extension Housing Bolt | 60-80 (81-109) |
| Transmission-To-Engine Bolt | 40-50 (54-68) |
| E4OD |
| Crossmember-To-Frame Bolt | 43-57 (58-77) |
| Oil Pan Bolt | 10-12 (14-16) |
| Parking Brake Assembly Filler Plug | 25-30 (34-41) |
| Parking Brake Assembly-To-Transmission Bolt (2) | 25-43 (34-58) |
| Oil Pan Bolt | (3) |
| Torque Converter-To-Drive Plate Nut | 20-30 (27-41) |
| Transmission Mount-To-Crossmember Nut | 60-80 (81-109) |
| Transmission-To-Engine Bolt | 40-50 (54-68) |
| (1) Tighten bolts to 97-115 INCH lbs. (11-13 N.m). (2) Always use NEW bolts. DO NOT reuse bolts. (3) Tighten bolts to 106-133 INCH lbs. (12-15 N.m). |
| (1) | Tighten bolts to 97-115 INCH lbs. (11-13 N.m). |
| (2) | Always use NEW bolts. DO NOT reuse bolts. |
| (3) | Tighten bolts to 106-133 INCH lbs. (12-15 N.m). |
