Contents Section: Cooling System (mechanical) All sections

Cooling System Specifications Ford Bronco II I

ENGINE COOLANT SPECIFICATIONS

CAUTIONDo not stand in line with or near radiator fan when engine is running until fan has been checked for damage or loose parts. Fan must be replaced as an assembly.

THERMOSTAT

Thermostat begins opening at 192°F (89°C), and is fully opened at 212°F (100°C).

PRESSURE CAP

All models use 15 psi (1.0 kg/cm 2 ) pressure cap which should be tested in that range.

MAINTENANCE

Vehicle maintenance schedule is on glovebox and Emission Control Information Decal. Check coolant annually. Hoses and clamps should be inspected every 3 years or 50,000 miles, whichever occurs first.

ApplicationQuarts (L)
2.0L 4-Cyl.6.5 (6)
2.3L 4-Cyl.
Aerostar
Man. Trans.7 (6.5)
Auto. Trans.8 (7.5)
Bronco II & Ranger
Man. Trans.6.5 (6)
Auto. Trans.8 (7.5)
2.3L 4-Cyl. Diesel12 (11)
2.9L V67 (6.5)
3.0L V6
Aerostar12 (11)
Econoline & Club Wagon15 (14)
4.9L 6-Cyl.
Man. Trans.13 (12)
Auto. Trans.13 (12)
5.0L V8
Econoline & Club Wagon17.5 (16.5)
F-150/250
Man. Trans.13 (12)
Auto. Trans.16 (15)
6.9L Diesel
"E" Series31 (29)
"F" Series29 (27.5)
7.5L V8
F-35018 (17)

COOLANT CAPACITY