Home/Eagle/Vision/Eagle Vision I (1992-1997)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul: Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul: Specifications Eagle Vision I

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
2.2L & 2.5L
Fuel Rail Bolts10 (14)
Fuel Tank Strap Nuts17 (23)
O2 Sensor20 (27)
Throttle Body Bolts15 (20)
3.0L
Fuel Rail Bolts10 (14)
Fuel Tank Strap Nuts17 (23)
O2 Sensor20 (27)
Throttle Body Bolts19 (26)
Upper Intake Manifold Bolts10 (14)
3.3L & 3.5L
Fuel Tank Strap Nuts44 (60)
Intake Manifold Bolts
3.3L17 (23)
3.5L21 (28)
O2 Sensor21 (28)
Throttle Body Bolts/Nuts19 (26)
INCH Lbs. (N.m)
2.2L & 2.5L
Fuel Pressure Regulator Screws44 (5)
Injector Cap Screw44 (5)
Throttle Position Sensor Screws18 (2)
3.0L
Fuel Hose Clamps9 (1)
Fuel Pressure Regulator Bolts89 (10)
Throttle Position Sensor Screws18 (2)
3.3L & 3.5L
Camshaft Position Sensor Bolt106 (12)
Crankshaft Position Sensor Bolt106 (12)
Fuel Pressure Regulator Bolt62 (7)
Fuel Pump Band Clamp31 (4)
Fuel Rail Bolts
3.3L200 (23)
3.5L100 (11)
Throttle Position Sensor Screws25 (3)

TORQUE SPECIFICATIONS