* PLEASE READ THIS FIRST *
Placing a non-compatible vehicle on a single-axle dynamometer could result in a safety hazard to technicians and damage to vehicle. Vehicles which use All-Wheel Drive (AWD) or traction control may not be clearly marked. Use common sense and take all necessary precautions when placing any vehicle on the dynamometer. Determine between full-time 4WD and All-Wheel Drive (AWD) for testing purposes. The following tables include information related to full-time 4WD and AWD vehicles, and how to disable the traction control system (if disengageable).
| WARNING | DO NOT operate vehicle on a 2-wheel dynamometer if the DO NOT TEST column is marked. |
| Application | FWD | RWD | Part Time 4WD | Full Time 4WD | AWD | TCS | Do Not Test |
|---|
| Summit Wagon |
| 1992-96 (AWD) | — | — | — | — | X | — | X |
| 1992-96 (FWD) | X | — | — | — | — | — | — |
| Talon |
| 1990-98 (AWD) | — | — | — | — | X | — | X |
| 1990-98 (FWD) | X | — | — | — | — | — | — |
| Vision |
| 1993-97 | X | — | — | — | — | X (2) | — |
| (1) Mode selector is located in instrument panel. To change mode, stop vehicle. Pull and hold lock pin down, then move switch lever to 2WD. It may be necessary to move vehicle forward or backwards to disengage axle and transfer case. (2) Press switch on instrument panel. TRAC OFF light will illuminate when system is disabled. |
| (1) | Mode selector is located in instrument panel. To change mode, stop vehicle. Pull and hold lock pin down, then move switch lever to 2WD. It may be necessary to move vehicle forward or backwards to disengage axle and transfer case. |
| (2) | Press switch on instrument panel. TRAC OFF light will illuminate when system is disabled. |
