Home/Dodge/Stealth/Dodge Stealth I (1990-1996)/Repair manual/Removal & Installation/Engine Controls - Removal, Overhaul & Installation: Specifi…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Removal, Overhaul & Installation: Specifications Dodge Stealth I

TORQUE SPECIFICATIONS

ApplicationsFt. Lbs. (N.m)
Exhaust Manifold-To-Engine Nuts18-22 (24-30)
Exhaust Manifold-To-Turbocharger Bolts40-47 (54-64)
Exhaust Pipe Bolts22-29 (30-39)
Fuel Tank Drain Plug11-18 (15-24)
Fuel Tank Nuts15-22 (20-30)
Oil Pipe-To-Engine10-14 (14-19)
Oxygen (O2) Sensor29-36 (39-49)
Plenum-To-Intake Manifold Bolts11-15 (15-20)
Water Pipe-To-Turbocharger
Except Stealth & 3000GT25-36 (34-49)
Stealth & 3000GT22 (30)
INCH Lbs. (N.m)
Fuel Rail Bolts84-108 (9.0-12.0)
Heat Protector Bolts108-132 (12.0-15.0)
ISC Switch Screws20-54 (2.5-4.5)
TPS Switch Screws13-20 (1.5-2.5)
Wastegate Actuator Bolts84-108 (9.0-12.0)

TORQUE SPECIFICATIONS