Home/Dodge/Stealth/Dodge Stealth I (1990-1996)/Repair manual/Automatic Trans/Removal & Installation - A/t: Specifications
Contents Wiring diagrams Section: Automatic Trans All sections

Removal & Installation - A/t: Specifications Dodge Stealth I

TORQUE SPECIFICATIONS

ApplicationsFt. Lbs. (N.m)
FWD Models
Torque Converter-To-Drive Plate Bolt
Precis53-55 (72-76)
All Others34-38 (46-52)
Transaxle-To-Engine Block Bolt
8-mm Bolt(1)
10-mm Bolt22-25 (30-34)
12-mm Bolt31-40 (42-54)
Upper Coupling Bolts (Diamante, Stealth & 3000GT)54 (73)
Lower Coupling Bolts (Diamante, Stealth & 3000GT)65 (88)
RWD Models
Torque Converter-To-Drive Plate Bolt
Montero25-30 (34-41)
Pickup & Ram-5033-38 (45-52)
Transmission-To-Engine Block Bolt
Montero
10 x 40-mm Bolt22-30 (30-41)
12 x 40-mm Bolt47-61 (64-83)
12 x 55-mm Bolt58-72 (79-98)
Pickup & Ram-50
10 x 16-mm Bolt22-30 (30-41)
10 x 50-mm Bolt31-40 (42-54)
10 x 70-mm Bolt31-40 (42-54)
(1) Tighten to 84-108 INCH lbs. (10-12 N.m).
(1)Tighten to 84-108 INCH lbs. (10-12 N.m).

TORQUE SPECIFICATIONS