BELT ADJUSTMENT
Belts should be adjusted to proper tension using belt tension gauge. See BELT ADJUSTMENT SPECIFICATIONS table. Some models may be equipped with a automatic belt tensioner to maintain belt tension. Ensure serpentine belts are routed properly. (Scheme 1)- (Scheme 3).
Note. Cracking across serpentine belt rib surfaces is considered normal wear. Serpentine belt must be replaced if cracks run parallel to rib area.
| Application | New Belt Lbs. (kg) | (1) Used Belt Lbs. (kg) |
|---|---|---|
| 3.9L, 5.2L, 5.9L | (2) | (2) |
| (1) Belt is considered used after 15 minutes of service. (2) Equipped with automatic belt tensioner and no belt adjustment is required. | ||
| (1) | Belt is considered used after 15 minutes of service. |
| (2) | Equipped with automatic belt tensioner and no belt adjustment is required. |
BELT ADJUSTMENT SPECIFICATIONS
