Repair manual
Dodge Ram Wagon B2500 Repair Manual
Step-by-step repair and maintenance instructions for the Dodge Ram Wagon B2500 (1997–1998): removal, installation, adjustment, diagnostics and parameter checks with illustrations.
- IDENTIFICATION
- RWAL CONTROLLER ANTI-LOCK BRAKE (CAB)
- CAB Inputs
- CAB Outputs
- NORMAL BRAKING MODE
- ANTI-LOCK BRAKING MODE
- POWER SUPPLY & GROUND
- TERMINOLOGY
- REAR WHEEL SPEED SENSOR & EXCITER RING
- BRAKE LAMP SWITCH
- HYDRAULIC CONTROL UNIT (HCU)
- ABS WARNING LAMP
- RED BRAKE WARNING LAMP
- COMBINATION VALVE
- PRESSURE DIFFERENTIAL SWITCH
- METERING VALVE
- 4X4 SWITCH
- SELF-DIAGNOSTIC SYSTEM
- COMPONENT LOCATIONS
- BLEEDING
- PREPARATION FOR TESTING
- VEHICLE DAMAGE WARNINGS
- TEST 1A: VERIFYING CUSTOMER CONCERN
- TEST 1B: ABS AND/OR BRAKE WARNING LAMPS REMAIN ILLUMINATED, FLASH, OR DO NOT COME ON AT ALL
- CHECKING WHEEL SPEED SENSOR AIR GAP
- TEST 1C: CHECKING SYSTEM FOR DIAGNOSTIC TROUBLE CODES (DTCs)
- CLEARING DIAGNOSTIC TROUBLE CODES
- DIAGNOSTIC TROUBLE CODE DEFINITIONS
- Set Condition
- Theory Of Operation
- Possible Causes
- Testing Procedure
- SYSTEM TESTS
- TEST 18A: REAR WHEEL SPEED SENSOR HARNESS VISUAL INSPECTION
- TEST VER-1A: VERIFICATION TEST
- REMOVAL & INSTALLATION
- 14-PIN CAB CONNECTOR
- HCU HARNESS
- REAR WHEEL SPEED SENSOR CONNECTORS
- 16-PIN DATA LINK CONNECTOR (DLC)
- BRAKE LAMP SWITCH CONNECTORS
- IGNITION SWITCH CONNECTORS
- 4X4 SWITCH CONNECTORS
- ELECTRONIC VACUUM SENSOR CONNECTORS
- INSTRUMENT CLUSTER/MESSAGE CENTER CONNECTORS
- SPECIFICATIONS