TRANSMISSION OVERDRIVE SOLENOID & TRANSMISSION TORQUE CONVERTER CLUTCH (TCC) SOLENOID
Note. Transmission overdrive solenoid may also be referred to as overdrive solenoid or 3-4 shift solenoid.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Crankshaft Position Sensor Bolt |
| 2.5L | 14 (19) |
| 3.9L, 5.2L & 5.9L | (1) |
| 8.0L | (1) |
| Downstream Oxygen Sensor | 22 (30) |
| Distributor Hold-Down Bolt | 17 (23) |
| EVAP Canister-To-Mounting Bracket Nut |
| Dakota & Durango | 17 (23) |
| Ram Pickup | (2) |
| Ram Van & Ram Wagon | (3) |
| Fuel Pump Module Lock Nut |
| Dakota | 40 (54) |
| Ram Pickup | 32 (43) |
| Ram Van & Ram Wagon | 40 (54) |
| Fuel Rail Bolt |
| 2.5L | (4) |
| 3.9L, 5.2L & 5.9L | 17 (23) |
| 8.0L | 11 (15) |
| Fuel Tank Strap Nut |
| Dakota & Durango | 40 (54) |
| Ram Pickup | 30 (41) |
| Ram Van & Ram Wagon | (5) |
| IAT Sensor | 20 (27) |
| Park/Neutral Switch | 25 (34) |
| Power Steering Pressure Switch (2.5L) | 16 (22) |
| Spark Plug | 30 (41) |
| Throttle Body Bolt |
| 2.5L | (4) |
| 3.9L, 5.2L & 5.9L | 17 (23) |
| Throttle Body Nut (8.0L) | 16 (22) |
| Upper Intake Manifold Bolt (8.0L) | (6) 16 (22) |
| Upstream Oxygen Sensor | 22 (30) |
| Wheel Lug Nut (Dakota & Durango) | 100 (136) |
| INCH Lbs. (N.m) |
| Air Cleaner Housing-To-Throttle Body Nut (Dakota & Durango) | 96 (10.8) |
| Camshaft Position Sensor Bolt (8.0L) | 50 (5.6) |
| Engine Coolant Temperature Sensor | 96 (10.8) |
| EVAP Canister Mounting Bracket-To Body Nut (Ram Van & RamWagon) | 95 (10.7) |
| EVAP Leak Detection Pump Filter Bolt (Ram Pickup, Ram Van & Ram Wagon) | 65 (7.3) |
| EVAP Leak Detection Pump Bolt | 11 (1.2) |
| EVAP Purge Solenoid Nut (Dakota & Durango) | 75 (8.5) |
| IAC Motor Bolt | 60 (6.8) |
| Ignition Coil Bolt/Nut |
| Dakota, Durango, Ram Van & Ram Wagon | (7) |
| Ram Pickup |
| 3.9L, 5.2L & 5.9L | (7) |
| 8.0L | 90 (10.2) |
| MAP Sensor Bolt |
| Dakota & Durango | 25 (2.8) |
| Ram Pickup |
| 3.9L, 5.2L & 5.9L | 25 (2.8) |
| 8.0L | 20 (2.3) |
| Ram Van & Ram Wagon | 25 (2.8) |
| PCM Bolt | 35 (4.0) |
| TP Sensor Bolt | 60 (6.8) |
| (1) Tighten retaining bolts to 70 INCH lbs. (7.9 N.m). (2) Tighten nuts to 80 INCH lbs. (9.0 N.m). (3) Tighten nuts to 71 INCH lbs. (8.0 N.m). (4) Tighten bolts to 100 INCH lbs. (11.3 N.m). (5) Tighten retaining nuts to 60 INCH lbs. (6.8 N.m). (6) Tighten bolts to specification in sequence. (Схема №39) (7) On ignition coil using only bolts, tighten bolts to 50 INCH lbs. (5.6 N.m). On ignition coil using bolts and nuts, tighten bolts/nuts to 100 INCH lbs. (11.3 N.m). |
| (1) | Tighten retaining bolts to 70 INCH lbs. (7.9 N.m). |
| (2) | Tighten nuts to 80 INCH lbs. (9.0 N.m). |
| (3) | Tighten nuts to 71 INCH lbs. (8.0 N.m). |
| (4) | Tighten bolts to 100 INCH lbs. (11.3 N.m). |
| (5) | Tighten retaining nuts to 60 INCH lbs. (6.8 N.m). |
| (6) | Tighten bolts to specification in sequence. (Схема №39) |
| (7) | On ignition coil using only bolts, tighten bolts to 50 INCH lbs. (5.6 N.m). On ignition coil using bolts and nuts, tighten bolts/nuts to 100 INCH lbs. (11.3 N.m). |
