DIAGNOSIS AND TESTING - CHIME CONDITIONS
Note. The chime/buzzer warning system is diagnosed using a DRBIII(R) scan tool. Refer to BODY DIAGNOSTIC PROCEDURES .
Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals. If any of the conditions are present, repair as necessary. If not, use the DRBIII(R) scan tool and BODY DIAGNOSTIC PROCEDURES . For complete circuit diagrams, refer to SYSTEM WIRING DIAGRAMS - R1500 , SYSTEM WIRING DIAGRAMS - R2500 or SYSTEM WIRING DIAGRAMS - R3500 .