Home ReviewsRefund
Home/Dodge/Pickup R2500/Dodge Pickup R2500 (1996-2010)/Repair manual/Entertainment Systems/Audio: Other
Contents Wiring diagrams Section: Entertainment Systems All sections

Audio: Other Dodge Pickup R2500

Entertainment Systems 1 illustration ~392 words

ENGINE TO HEAT SHIELD - 5.9L AND 8.0L ENGINE

  1. Disconnect and isolate the battery negative cable.
  2. Remove the attaching bolts from the cylinder heads (Scheme 22)
  3. Remove nut from heat shield and remove strap see scheme 12

Scheme 22

Scheme 22
Scheme 22

BED TO CAB

  1. Install the ground strap and retaining bolts. Tighten to 5 N.m (45 in. lbs.).
  2. Connect the battery negative cable.

ENGINE TO HEAT SHIELD

  1. Install the retaining nut and ground strap to the plenum. Tighten to 8 N.m (70 in. lbs.).
  2. Install the retaining bolt and ground strap to the engine cylinder heads. Tighten to 12 N.m (106 in. lbs.).
  3. Connect the battery negative cable.

STANDARD

The standard equipment speaker system includes speakers in four locations. One 15.2 X 22.8 centimeter (6 X 9 inch) full-range speaker is located in each front door. There is also one full-range 13.3 centimeter (5.25 inch) diameter full-range speaker located in each rear door.

PREMIUM

The optional premium speaker system features eleven Premium model speakers in seven locations. Each of the standard speakers is replaced with Premium model speakers. One 8.8 centimeter (3.50 inch) diameter speaker is located on each end of the instrument panel top pad. One 6.3 centimeter (2.50 inch) diameter speaker is located in the center of the instrument panel top pad. One 15.2 X 22.8 centimeter (6 X 9 inch) Premium speaker is located in each front door. There is also one coaxial 13.3 centimeter (5.25 inch) diameter Premium full-range speaker located in each rear door. The premium speaker system also includes a power amplifier mounted behind the glove box. The total available power of the premium speaker system is 240 watts.

FRONT DOOR SPEAKER

  1. Connect electrical harness connector and install speaker.
  2. Install front door trim panel (Refer to «INSTALLATION»(ref-189710-S34006502962005091100000) ).
  3. Connect battery negative cable.

INSTRUMENT PANEL CENTER SPEAKER

  1. Connect electrical harness connector and install speaker.
  2. Install instrument panel top cover (Refer to «INSTALLATION»(ref-189714-S42892362512005091100000) ).
  3. Connect battery negative cable.

INSTRUMENT PANEL END SPEAKER

  1. Connect electrical harness connector and install speaker.
  2. Install instrument panel top cover (Refer to «INSTALLATION»(ref-189714-S42892362512005091100000) ).
  3. Connect battery negative cable.

REAR CAB SIDE SPEAKER

  1. Connect electrical harness connector and install speaker.
  2. Install B-pillar lower trim (Refer to «INSTALLATION»(ref-189715-S06415326372005091100000) ).
  3. Connect battery negative cable.

REAR DOOR SPEAKER

  1. Connect electrical harness connector and install speaker.
  2. Install rear door trim panel (Refer to «INSTALLATION»(ref-189711-S00571169552005091100000) ).
  3. Connect battery negative cable.

More articles — Audio