Frames & Bumpers: Overview Dodge Nitro I

Scheme 7

1. Remove both of the front wheel liners only enough to gain access to the bolts, refer to REMOVAL .
2. Remove three front fascia push pins (6) securing fascia (5) to carrier (3).
3. Remove two rivets (7) securing the fascia (5) to fascia bracket (1) for both sides of the vehicle.
4. If equipped, disconnect the electrical connectors (4) from both of the fog lamp assemblies.
5. Remove two front fascia screws (2) from the fascia bracket.
6. Remove the fender flairs, refer to REMOVAL .
7. Release eight tabs securing the fascia (5) to the grille opening reinforcement.
8. Remove fascia (5) from vehicle.