Home/Dodge/Neon/Dodge Neon II (1999-2005)/Repair manual/Removal & Installation/Engine Controls - Removal, Overhaul & Installation: Specifi…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Removal, Overhaul & Installation: Specifications Dodge Neon II

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Downstream Oxygen Sensor20 (27)
Engine Coolant Temperature Sensor13 (18)
EVAP Canister Bracket-To-Vehicle Bolt16 (22)
Fuel Pump Module Lock Nut40 (54)
Fuel Rail Bolt17 (23)
Fuel Tank Strap Nut17 (23)
Input Speed Sensor20 (27)
Output Speed Sensor20 (27)
Spark Plug20 (27)
Sway Bar Bracket Bolt25 (34)
Throttle Body Bolt17 (23)
Transmission Oil Pan Bolts14 (19)
Upstream Oxygen Sensor20 (27)
INCH Lbs. (N.m)
Camshaft Position Sensor Screw80 (9.0)
Camshaft Position Sensor Target Magnet Bolt30 (3.4)
Crankshaft Position Sensor Bolt90 (10.2)
EVAP Canister-To-Bracket Retaining Nut60 (6.7)
EVAP Leak Detection Pump Mounting Bracket Bolt90 (10.2)
EVAP Leak Detection Pump-To-Bracket Bolt11 (1.2)
Idle Air Control Motor Screw40 (4.5)
Knock Sensor90 (10.2)
Manifold Absolute Pressure Sensor Screws40 (4.5)
Power Steering Pressure Switch70 (7.9)
Transmission Range Sensor Screw45 (5.1)
Valve Body-To-Transaxle Case Bolts105 (11.9)
Vehicle Speed Sensor Retaining Bolt60 (6.7)

TORQUE SPECIFICATIONS