LUBRICATION
There are no serviceable lubrication points on the front or rear suspension. The ball joints and tie rod ends are sealed for life and require no maintenance.
Scheme 41
This vehicle has a gas pressurized MacPherson strut type front suspension design.
Each side of the front suspension consists of these major components
- (1) Strut Assembly
- (2) Fore/Aft Crossmember
- (3) Stabilizer Bar
- (4) Front Suspension Crossmember
- (5) Lower Control Arm
- (6) Hub And Bearing
- (7) Knuckle
Service procedures for the front suspension crossmember and fore/aft crossmember can be found in the FRAME AND BUMPERS .