Home ReviewsRefund
Home/Dodge/Intrepid/Dodge Intrepid II (1997-2004)/Repair manual/Specifications/Engine Controls - Service & Adjustment Specifications: Other
Contents Wiring diagrams Section: Specifications All sections

Engine Controls - Service & Adjustment Specifications: Other Dodge Intrepid II

Specifications ~152 words

ENGINE COMPRESSION

Ensure battery is fully charged. Check engine compression with engine at normal operating temperature at normal cranking speed, all spark plugs removed and throttle wide open.

VALVE CLEARANCE

Note. All models are equipped with hydraulic lash adjusters. No adjustments are required.

4-CYLINDER IGNITION COIL RESISTANCE

ApplicationCoil ManufacturerPrimarySecondary
Breeze, Cirrus & Stratus
2.0L & 2.4LToyodenso Or Diamond.51-.6111,500-13,500
Neon
2.0L SOHCWeastec (Steel Towers).45-.6511,500-13,500
2.0L SOHCDiamond (Copper Towers).53-.6510,900-14,700

4-CYLINDER IGNITION COIL RESISTANCE - Ohms @ 70°F (21°C)

V6 IGNITION COIL RESISTANCE

ApplicationCoil ManufacturerPrimarySecondary
Avenger & Sebring Coupe
2.5L(1).60-.8012,000-18,000
Cirrus & Stratus
2.5LMelco.60-.8012,500-18,000
Concorde, Intrepid, LHS & 300M
2.7L, 3.2L & 3.5L(1)(1)(1)
Sebring Convertible
2.5LMelco.60-.8012,500-18,000
(1) Information is not available from manufacturer.
(1)Information is not available from manufacturer.

V6 IGNITION COIL RESISTANCE - Ohms @ 70°F (21°C)

4-CYLINDER HIGH TENSION WIRE RESISTANCE

ApplicationOhms
Breeze, Cirrus & Stratus
2.0L & 2.4L (1)
Cylinder No. 1 Or 43500-4900
Cylinder No. 2 Or 32950-4100
Neon
2.0L SOHC (1)
Cylinder No. 1 Or 43500-4900
Cylinder No. 2 Or 32950-4100
(1) Resistance listed according to high tension wire application. For cylinder identification, see FIRING ORDER & TIMING MARKS .
(1)Resistance listed according to high tension wire application. For cylinder identification, see FIRING ORDER & TIMING MARKS .

4-CYLINDER HIGH TENSION WIRE RESISTANCE

V6 HIGH TENSION WIRE RESISTANCE

ApplicationOhms
Avenger & Sebring Coupe
2.5L(1) 22,000
Cirrus & Stratus
2.5L(2)
Sebring Convertible
2.5L(2)
Concorde, Intrepid, LHS & 300M(3)
(1) Maximum wire resistance is listed. (2) Resistance should be 250-560 ohms per one inch or 3000-6700 ohms per foot. (3) Coil on plug.
(1)Maximum wire resistance is listed.
(2)Resistance should be 250-560 ohms per one inch or 3000-6700 ohms per foot.
(3)Coil on plug.

V6 HIGH TENSION WIRE RESISTANCE

4-CYLINDER SPARK PLUG TYPE

ApplicationChampion No.
Breeze, Cirrus & Stratus
2.0LRC9YC
2.4LRC12YC5
Neon
2.0L SOHCRC9YC
(1) Check spark plug application on underhood vehicle emission control label. If application differs from application listed, use application on underhood vehicle emission control label.
(1)Check spark plug application on underhood vehicle emission control label. If application differs from application listed, use application on underhood vehicle emission control label.

4-CYLINDER SPARK PLUG TYPE (1)

V6 SPARK PLUG TYPE

ApplicationChampion No.
Avenger & Sebring Coupe
2.5L(2) RC10PYP4
Cirrus & Stratus
2.5LRC10PYP4
Concorde, Intrepid, LHS & 300M
2.7LRE10PMC5
3.2L & 3.5LRE12PEC5
Sebring Convertible
2.5LRC10PYP4
(1) Check spark plug application on underhood vehicle emission control label. If application differs from application listed, use application on underhood vehicle emission control label. (2) NGK PFR5J-11 or Nippondenso PK16PR-P11 spark plugs may also be used.
(1)Check spark plug application on underhood vehicle emission control label. If application differs from application listed, use application on underhood vehicle emission control label.
(2)NGK PFR5J-11 or Nippondenso PK16PR-P11 spark plugs may also be used.

V6 SPARK PLUG TYPE (1)

4-CYLINDER FUEL PUMP PERFORMANCE

Application(1) Pressure psi (kg/cm 2 )
Breeze, Cirrus & Stratus
2.0L & 2.4L(2) 46-50 (3.2-3.5)
Neon
2.0L SOHC(2) 44-54 (3.1-3.8)
(1) Manufacturer lists fuel pressure with engine idling. (2) Manufacturer lists fuel pressure with engine off, ignition on and using scan tool to activate fuel pump.
(1)Manufacturer lists fuel pressure with engine idling.
(2)Manufacturer lists fuel pressure with engine off, ignition on and using scan tool to activate fuel pump.

4-CYLINDER FUEL PUMP PERFORMANCE

V6 FUEL PUMP PERFORMANCE

ApplicationPressure psi (kg/cm 2 )
Avenger & Sebring Coupe
2.5L(1) 47-50 (3.3-3.5)
Cirrus & Stratus
2.5L(2) 46-50 (3.2-3.5)
Concorde, Intrepid, LHS & 300M
2.7L, 3.2L & 3.5L(2) 54-64 (3.8-4.5)
Sebring Convertible
2.5L(2) 43-53 (3.0-3.7)
(1) Manufacturer lists fuel pressure with engine idling. (2) Manufacturer lists fuel pressure with engine off, ignition on and using scan tool to activate fuel pump.
(1)Manufacturer lists fuel pressure with engine idling.
(2)Manufacturer lists fuel pressure with engine off, ignition on and using scan tool to activate fuel pump.

V6 FUEL PUMP PERFORMANCE

FUEL INJECTOR RESISTANCE

ApplicationOhms
Avenger & Sebring Coupe
2.5L13-16
Breeze, Cirrus & Stratus(1)
Concorde, Intrepid, LHS & 300M(1)
Neon
2.0L SOHC12
Sebring Convertible(1)
(1) Information is not available from manufacturer.
(1)Information is not available from manufacturer.

FUEL INJECTOR RESISTANCE SPECIFICATIONS - Ohms @ 68°F (20°C)

IDLE SPEED & MIXTURE

Application(1) Idle RPMCO Level
Avenger & Sebring Coupe(2) 650-850(3)
All Other Models(2)(3)
(1) Check idle speed with engine at normal operating temperature, transaxle in Park (A/T) or Neutral (M/T) and all accessories off. (2) Idle speed is controlled by Powertrain Control Module PCM) and idle air control motor. No adjustment is required. Only throttle body minimum airflow idle speed may be checked. (3) Information is not available from manufacturer.
(1)Check idle speed with engine at normal operating temperature, transaxle in Park (A/T) or Neutral (M/T) and all accessories off.
(2)Idle speed is controlled by Powertrain Control Module PCM) and idle air control motor. No adjustment is required. Only throttle body minimum airflow idle speed may be checked.
(3)Information is not available from manufacturer.

IDLE SPEED & CO LEVEL

More articles — Engine Controls - Service & Adjustment Specifications