DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Brake Rotor |
| Diameter | (1) |
| Original Thickness |
| Front Brake Rotor | 1.019-1.029 (25.88-26.13) |
| Rear Brake Rotor | 0.458-0.478 (11.63-12.14) |
| Minimum Refinish Thickness (2) |
| Front Brake Rotor | .960 (24.4) |
| Rear Brake Rotor | .409 (10.4) |
| Runout | .003 (.08) |
| Thickness Variation |
| Front & Rear Brake Rotors | .0005 (.013) |
| Hub Assembly Runout |
| Front & Rear Hub Assemblies | .0012 (.03) |
| (1) Information is not available from manufacturer. (2) Minimum refinish thickness is marked on front of brake rotor. If specification differs from specification listed, use specification marked on brake rotor. |
| (1) | Information is not available from manufacturer. |
| (2) | Minimum refinish thickness is marked on front of brake rotor. If specification differs from specification listed, use specification marked on brake rotor. |
DISC BRAKE SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Brake Caliper Bleed Screw | 11 (15) |
| Brakeline-To-Front Brake Caliper Union Bolt | 35 (47) |
| Brakeline-To-Master Cylinder Nut | 13 (17) |
| Brakeline-To-Proportioning Valve Nut | 13 (17) |
| Brakeline-To-Rear Brake Caliper Union Bolt | 35 (47) |
| Brakeline-To-Wheel Cylinder Nut | 13 (17) |
| Front Brake Caliper Guide Pin Bolt | 16 (22) |
| Master Cylinder-To-Power Brake Booster Nut | 21 (28) |
| Parking Brake Pedal Mechanism Retaining Bolt | 21 (28) |
| Power Brake Booster-To-Firewall Nut | 21 (28) |
| Rear Brake Caliper Guide Pin Bolt | 16 (22) |
| Rear Hub Assembly Nut | 124 (168) |
| Wheel Lug Nut | (1) 100 (135) |
| (1) Tighten nuts in crisscross sequence to half torque, then tighten to full torque. |
| (1) | Tighten nuts in crisscross sequence to half torque, then tighten to full torque. |
