FLUID CAPACITIES
| Application | Refill - Qts. (L) | Dry Fill - Qts. (L) |
|---|
| Except Prowler | (2) 4.0 (3.8) | 9.3 (8.8) |
| Prowler | (2) 4.0 (3.8) | 10.3 (9.8) |
| (1) Approximate quantities listed. (2) Add specified amount of fluid. Start engine and allow it to idle for at least one minute. With brakes applied, shift transaxle through all gear ranges and return to Park. Add additional fluid to bring level to 1/8" below ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level to within HOT range on dipstick. |
| (1) | Approximate quantities listed. |
| (2) | Add specified amount of fluid. Start engine and allow it to idle for at least one minute. With brakes applied, shift transaxle through all gear ranges and return to Park. Add additional fluid to bring level to 1/8" below ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level to within HOT range on dipstick. |
TRANSAXLE FLUID CAPACITIES (1)
| Application | Qts. (L) |
|---|
| All | .77 (.73) |
| (1) Approximate quantity listed. |
| (1) | Approximate quantity listed. |
DIFFERENTIAL FLUID CAPACITY (1)
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Chain Cover Bolt | 21 (29) |
| Differential Cover Bolt | 21 (29) |
| Differential Filler Plug | 35 (47) |
| Input Speed Sensor | 20 (27) |
| Oil Pan Bolt | 17 (23) |
| Output Speed Sensor | 20 (27) |
| INCH Lbs. (N.m) |
| Bearing Adjuster Lock Bracket Bolt | 45 (5.1) |
| Differential Drain Plug | 62 (7.0) |
| Gearshift Cable Adjuster Nut | 70 (8.0) |
| Lock Bracket Bolt | 45 (5.1) |
| Manual Valve Lever-To-Valve Body Bolt | 45 (5.1) |
| Oil Filter Retainer Bolt | 45 (5.1) |
| Solenoid Assembly-To-Transfer Plate Bolt | 53 (6.0) |
| Valve Body Plate Support Bolt | 45 (5.1) |
| Valve Body/Transfer Plate-To-Transaxle Case Bolt | 106 (12.0) |
