Power Windows - Service Information: Removal & Installation Dodge Dakota III рестайлинг

REMOVAL

The power window motor is integral to the power window regulator unit. If the power window motor is inoperative or damaged, the entire power window regulator unit must be replaced. Refer to Body/Door - Front/REGULATOR, Window - Removal or Body/Doors - Rear/REGULATOR, Window - Removal for the window regulator service procedures.

The driver and front passenger side power window switch is included in the window/lock switch. . Refer to Electrical - Power Systems/Power Locks/SWITCH, Lock - Removal for the service procedures.

Scheme 1

1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel. Refer to «Body/Doors - Rear/PANEL, Rear Door Trim - Removal»(ref-352624-S39340853432010010600000) .
3. Remove switch from door trim panel.

Scheme 2

The driver and front passenger side power window switch is included in the window/lock switch. . Refer to Electrical - Power Systems/Power Locks/SWITCH, Lock - Installation .

1. Install the switch to the door trim panel.
2. Install the door trim panel. Refer to «Body/Doors - Rear/PANEL, Rear Door Trim - Installation»(ref-352624-S30066930262010010600000) .
3. Connect the battery negative cable.