Power Windows: Removal & Installation Dodge Dakota III

REMOVAL

The driver and front passenger side power window switch is included in the window/lock switch. (Refer to ELECTRICAL/POWER LOCKS/POWER LOCK SWITCH - REMOVAL) for the service procedures.

Scheme 1

1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel «(Refer to BODY/DOORS - REAR/TRIM PANEL - REMOVAL)»(ref-247640-S08717588792007020100000) .
3. Remove switch from door trim panel.

Scheme 2

The driver and front passenger side power window switch is included in the window/lock switch. (Refer to ELECTRICAL/POWER LOCKS/POWER LOCK SWITCH - INSTALLATION) .

1. Install the switch to the door trim panel.
2. Install the door trim panel «(Refer to BODY/DOORS - REAR/TRIM PANEL - INSTALLATION)»(ref-247640-S26077124932007020100000) .
3. Connect the battery negative cable.

The power window motor is integral to the power window regulator unit. If the power window motor is inoperative or damaged, the entire power window regulator unit must be replaced. (Refer to BODY/DOOR - FRONT/WINDOW REGULATOR - REMOVAL) or (Refer to BODY/DOORS - REAR/WINDOW REGULATOR - REMOVAL) for the window regulator service procedures.