Home ReviewsRefund
Home/Dodge/Dakota/Dodge Dakota III (2004-2007)/Repair manual/Starter/Starting System: Other
Contents Wiring diagrams Section: Starter All sections

Starting System: Other Dodge Dakota III

Starter ~165 words

3.7L/4.7L With Manual Trans.

  1. Connect solenoid wire to starter motor (snaps on).
  2. Position battery cable (1) to solenoid stud. Install and tighten battery cable eyelet nut (2). Refer to «SPECIFICATIONS - TORQUE - STARTING SYSTEM»(ref-247621-S04674528122007020100000) . Do not allow starter motor to hang from wire harness.
  3. Position starter motor (5) to transmission.
  4. Install and tighten lock washer (6) nut (8) and bolt (9). Refer to «SPECIFICATIONS - TORQUE - STARTING SYSTEM»(ref-247621-S04674528122007020100000) .
  5. Lower vehicle.
  6. Connect negative battery cable.

3.7L/4.7L With Auto. Trans.

  1. Connect solenoid wire to starter motor (snaps on).
  2. Position battery cable (1) to solenoid stud. Install and tighten battery cable eyelet nut (2). Refer to «SPECIFICATIONS - TORQUE - STARTING SYSTEM»(ref-247621-S04674528122007020100000) . Do not allow starter motor to hang from wire harness.
  3. Position starter motor (4) to transmission.
  4. If equipped with automatic transmission, slide cooler tube bracket into position.
  5. Install and tighten both bolts (3). Refer to «SPECIFICATIONS - TORQUE - STARTING SYSTEM»(ref-247621-S04674528122007020100000) .
  6. Lower vehicle.
  7. Connect negative battery cable.

More articles — Starting System