Maintenance Reminder Light Reset Procedures: Other Dodge Dakota III

MAINT REQD OR CHECK EGR INDICATOR LIGHT

Note. To determine the appropriate reset procedure, refer to MAINT REQD OR CHECK EGR INDICATOR LIGHT RESET INDEX . Only vehicles listed in this index have a MAINT REQD OR CHECK EGR INDICATOR LIGHT reset.

MAINT REQD OR CHECK EGR INDICATOR LIGHT RESET INDEX

MAINT REQD OR SERVICE REMINDER INDICATOR (SRI) LIGHT

The components to be serviced include the EGR system, PCV valve, oxygen sensor and some vacuum-operated components. SRI will illuminate after a predetermined mileage. To reset SRI, a Chrysler Diagnostic Readout Box (DRB) Tester or suitable scan tool is required.

Note. To determine the appropriate reset procedure, refer to MAINT REQD OR SRI LIGHT RESET INDEX . Only vehicles listed in this index have a MAINT REQD OR SRI LIGHT reset.

MAINT REQD OR SRI LIGHT RESET INDEX

OIL CHANGE REQUIRED MESSAGE

Note. To determine the appropriate reset procedure, refer to OIL CHANGE REQUIRED MESSAGE RESET INDEX . Only vehicles listed in this index have an Oil Change Required Message reset.

OIL CHANGE REQUIRED MESSAGE RESET INDEX

PERFORM SERVICE MESSAGE

Note. To determine the appropriate reset procedure, refer to PERFORM SERVICE MESSAGE RESET INDEX . Only vehicles listed in this index have a perform service message reset.

PERFORM SERVICE MESSAGE RESET INDEX

SERVICE REMINDER INDICATOR LIGHT

Note. To determine the appropriate reset procedure, refer to SERVICE REMINDER INDICATOR LIGHT RESET INDEX . Only vehicles listed in this index have a service reminder indicator light reset.

SERVICE REMINDER INDICATOR LIGHT RESET INDEX

SERVICE REMINDER MESSAGE

Note. To determine the appropriate reset procedure, refer to SERVICE REMINDER MESSAGE RESET INDEX . Only vehicles listed in this index have a Service Reminder Message reset.

SERVICE REMINDER MESSAGE RESET INDEX

TIRE PRESSURE MONITOR SYSTEM (TPMS)

Note. To determine the appropriate reset procedure, refer to TPMS RESET INDEX . Only vehicles listed in this index have a TPMS reset.

TPMS RESET INDEX

Tire Sensors Programming

Note. If a tire is changed (tire rotation), one or more tire pressure sensors fail, or if TPM module is replaced, the TPM system needs to relearn tire pressure sensor IDs. To perform this procedure, a Chrysler DRB-III® scan tool and a Relearn Magnet (8821) must be used.

Note. The vehicle's tires must not have been rotated above 5 mph (8 km/h) in the last 2 minutes prior to programming.

1. Connect Chrysler DRB-III® scan tool to vehicle's Data Link Connector (DLC), which is located beneath instrument panel, near steering column.
2. Using scan tool, access "CHASSIS SYSTEM".
3. Once in "CHASSIS SYSTEM", select "MISCELLANEOUS FUNCTIONS".
4. Select "TRAIN ALL MODE" from the menu selections. Select "YES" to continue.
5. Place Relearn Magnet (8821) over the valve stem for the left front wheel.
6. Each sensor/transmitter will automatically sense the presence of the magnet and begin transmitting. When the tire pressure sensor on each wheel has been programmed, the DRB-III® will automatically beep and direct you to the next wheel to be programmed. Move the magnet to each of the remaining wheels as directed by scan tool.
7. Remove magnet from last tire to be programmed (left rear wheel).
8. Once "TRAINING COMPLETED" is displayed, exit the program function screen and use the following to verify TPM functionality: Verify TPM module programming is complete by viewing the "INPUT/OUTPUT DISPLAY" selection of the DRB-III® and confirming the tire pressure sensors are trained. Verify TPM module programming is complete by viewing the "SENSOR DISPLAY" selection of the DRB-III® and confirming the tire pressure sensor pressure readings are accurate.