APPS
| CAUTION | Do not attempt to separate or remove the Accelerator Pedal Position Sensor (APPS) from the accelerator pedal assembly. The APPS is replaced as an assembly along with the pedal. If sensor is removed from pedal, its electronic calibration may be destroyed. |
| 1 - APPS |
|---|
| 2 - APPS 6-Way Electrical Connector |
| 3 - Accelerator Pedal |
| 4 - Mounting Bolts/Nuts |
- Disconnect 6-way electrical connector at top of APPS (2).
- Remove APPS lower mounting bolt (4) and two mounting nuts.
- Remove pedal and APPS assembly from vehicle.