Bench Repair
If entire regulator is not being replaced, repair as follows
- Remove regulator as previously described. WARNING: Step 2 below is very important. If not done before motor removal injury may result.
- Secure regulator in vise to prevent selector gear from rotating. Remove counter balance spring (Must be done for safety before removing motor).
- Remove 3 motor attaching screws and remove motor. Inspect regulator for: Selector gear teeth must not be broken or severely worn. All rivets and sliders must be securely attached. Parts must not be bent or cracked. Sector gear must rotate freely. Perform window lift motor test.
- Install motor and attach with 3 motor attaching screws. Install counter balance spring.