Steering System: Overhaul Dodge Avenger II рестайлинг

DISASSEMBLY

Note. There is no need to disassemble the Steering Column Control Module (SCCM) if only removing the SCCM from the column.

Scheme 22

Scheme 23

Scheme 24

Scheme 25

1. Remove the left multi-function switch stalk retaining screw (2).
2. Pull the left stalk out of the SCCM.
3. Disconnect the left stalk electrical connector.
4. Separate the left switch from the SCCM.
5. Remove the one right multi-function switch retaining screw.
6. Pull right switch out of SCCM.
7. Disconnect the right switch electrical connector.

ASSEMBLY

1. Connect the right stalk electrical connector.
2. Slide the right stalk into the groove and install the one retaining screw.
3. Connect the left stalk switch electrical connector.
4. Install the left stalk switch retaining screw.