FRONT HUB ASSEMBLY
| CAUTION | DO NOT apply vehicle weight to wheel bearing when loosening or tightening drive shaft nut. |
Note. DO NOT disassemble front hub assembly.
Disassembly
Install Spring Compressor (MB991237 ) on coil spring. Compress coil spring, and remove self-locking nut. Remove spring compressor and coil spring. Remove remaining components from shock absorber assembly. (Схема №9)
Reassembly
To reassemble, reverse disassembly procedure. Using spring compressor and Arm Set (MB991239 ), compress and install coil spring. Ensure edge of coil spring is aligned with stepped part of spring seat. Ensure upper bracket assembly bolts are positioned as indicated. (Схема №10)