Contents Wiring diagrams Section: Heater All sections

Heater System: Other Dodge Avenger I

Heater ~164 words

Air Selector Lever

The air selector lever, controls source of airflow into passenger compartment. In left position, outside air enters passenger compartment. In right position, air is recirculated inside passenger compartment.

Blower Motor Control Knob

The blower knob works only when ignition switch is in ON position. Blower knob has 5 positions, ranging from off to maximum blower speed.

Mode Selector Knob

The mode selector knob has 6 positions to direct airflow inside passenger compartment: face, foot/face (1), foot/face (2), foot, foot/defrost and defrost.

In foot/face (1) position, most air is directed to upper area of passenger compartment, with a small amount going to leg area. In foot/face (2) position, most air is distributed to leg area of passenger compartment, with a small amount going to upper area.

Temperature Control Knob

The temperature control knob, located on right side of control panel, is used to select desired temperature level by turning it clockwise or counterclockwise. Turning knob clockwise gradually increases temperature.