RESERVE CAPACITY
The reserve capacity is maximum length of time it is possible to travel at night with minimum electrical load and no generator output. Expressed in minutes, Reserve Capacity (or RC rating) is time required for a fully charged battery, at a temperature of 27° C (80° F), being discharged at a current of 25 amperes, to reach a terminal voltage of 10.5 volts.
BATTERY SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Cold Cranking Amps | 550 amps/630 amps | |
| Reserve Capacity Minimum | 90 minutes | |
| Load test | 270 amps | |
| Replacement | 85B-60 | |
| Minimum Voltage @ Approximate Temperature | ||
| 9.6 | 21° C (69.8° F) | |
| 9.4 | 20° C (68° F) | |
| 9.1 | 0° C (32° F) | |
| 8.8 | 10° C (14° F) | |
| 8.5 | 18° C (0° F) | |
| 8.0 | Below -18° C (Below .4° F) | |
BATTERY SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | N.m (Ft. Lbs.) |
|---|---|
| Battery Cable Nuts | 15 (11) |
| Battery Carrier Tray Upper, Lower, & Side Bolts | 20 (15) |
| Starter-To-Engine Block Mounting Bolt | 45 (33) |
| Starter-To-Engine Transaxle Mounting Bolt | 50 (37) |
| Upper Starter Bolt & Lower Start Stud/Weld Nut assembly | 43 (32) |
| N.m (INCH Lbs.) | |
| Battery Retainer Clamp-to-Battery Rod Nuts | 5 (44) |
| Starter Field Connector Nut | 8 (71) |
| Starter Solenoid Assembly Screws | 8 (71) |
| Starter Solenoid Terminal-To-Battery Cable Terminal Nut | 7 (62) |
| Starter Solenoid Terminal-To-Ignition Solenoid Terminal Nut | 6 (53) |
| Starter Through-Bolts | 6 (53) |
TORQUE SPECIFICATIONS
