Wiring diagram: Component locations — 8045 — Blower control module (if separate) — installation Citroen Jumpy II
All systems
- 12V current sockets 12
- ABS/ESP 25
- Air conditioning 40
- Alarm 10
- Audio system 12
- Automatic gearbox 3
- Bodywork conversion unit 6
- Brake information 7
- Brake lamps 20
- Central locking 49
- Cruise control 22
- Cruise control/speed limiter 6
- Day running lights
- Dipped beam / main beam headlamps 6
- Direction indicators / side repeaters / hazard warning lamps 11
- Door information 20
- Electric window 12
- Electrically controlled mirrors 10
- Electronic injection 40
- Electronically managed suspension 14
- Engine coolant and other information 33
- Engine coolant heating circuit 17
- Engine cooling 27
- Engine oil information 23
- Engine starting 23
- Exterior temperature information
- Fog lamps 13
- Fuel information 8
- Fuel level information 2
- General layout of ECUs 2
- General location of earths 5
- General location of harness labels 9
- General location of interconnections 6
- Headlamp wash 6
- Heated rear screen / heated rear view mirrors 16
- Heated seats 10
- Horns 5
- Immobiliser 23
- Key in ignition information 11
- Lamps left on alert 12
- Lighter and 12V socket 3
- Motorised boot
- Multifunction screen 6
- Multiplexed BODY CAN interconnection
- Multiplexed COMF CAN interconnection 11
- Multiplexed IS CAN interconnection 2
- Multiplexed network interconnection 24
- Parking assistance 11
- Particle filter 15
- Passenger compartment / closed compartment lighting 50
- Power steering 8
- Rear additional aircon 4
- Rear additional heating unit
- Rear screen wiper/wash 16
- Reversing lamps 16
- Screen wipe/wash 5
- Seat belt fastened information 5
- Seat belts / air bags 12
- Sidelamps 16
- Telematics 12
- Towbar 9
- Under inflation detection 4
- Vehicle information 2
- Ventilation / heating 16
- Allocation of BF02 fuses
- Allocation of BFDB fuses
- Allocation of BFH5 fuses 2
- Allocation of BMF1 fuses 2
- Allocation of BMF4 fuses
- Allocation of BSI1 fuses 2
- Allocation of BSR1 fuses
- Allocation of MFAV fuses
- Allocation of PSF1 fuses 2
- Component locations 562
- Ground points 34
- Splices 107
8045 — Blower control module (if separate) — installation — Component locations Citroen Jumpy II
Login- 8045 — Blower control module (if separate)
- 8046 — Blower motor resistor (if separated)
- 8064 — LH mixer flap reduction motor
- 8071 — Distribution flap reduction motor
- 8024 — Left passenger compartment air thermistor
- 8070 — Air inlet flap reduction motor
- 60 P/C