Left front block
| reference | designation | part number for part only | part number for part assembled with | thickness (mm) | trims | type |
|---|---|---|---|---|---|---|
| (1) | suspension mounting (left hand front) | - | 2+15 | 2,47 | G2 | HLE |
| (2) | wheel arch (left hand front) (joined parts) | - | 1+15 | before 1,17 - rear 0,77 | G2 | - |
| (3) | chassis leg-tunnel link | - | - | 1,17 | G2 | - |
| (4) | centre chassis leg upper stiffener | ** | - | 0,77 | G2 | - |
| (5) | chassis leg centre closing panel | ** | - | 1,47 | G2 | - |
| (6) | front chassis member | - | 9+10+12 | 1,47 | G2 | - |
| (7) | front block half-panel stiffener | - | 8+13+14+24 | 0,67 | G2 | - |
| (8) | front panel bracket | - | 7+13+14+24 | 1,17 | G2 | - |
| (9) | chassis leg link | - | 6+10+12 | 1,17 | G2 | - |
| (10) | connectors support | - | 6+9+12 | 1,47 | G2 | HLE |
| (11) | chassis leg crossmember | ** | - | 0,77 | G2 | - |
| (12) | chassis leg link closing panel | - | 6+9+10 | 0,67 | G2 | - |
| (13) | front left bumper front bracket | ** | 7+8+14+24 | 1,17 | G2 | - |
| (14) | front left bumper rear bracket | ** | 7+8+13+24 | 1,17 | G2 | - |
| (15) | wheel arch gusset (left hand front) | ** | 1+2 | 0,97 | G2 | HLE |
| (16) | chassis leg/sill link | ** | - | 1,17 | G2 | - |
| (17) | engine sub-frame front mounting support | - | 23 | 1,76 | G2 | - |
| (18) | chassis leg front partition | - | 23 | 1,17 | G2 | - |
| (19) | gearbox support strengthener | ** | - | 2,44 | G2 | HLE |
| (20) | chassis leg rear closing panel | ** | - | 1,47 | G2 | HLE |
| (21) | front wing inner panel | ** | - | 0,97 | G2 | - |
| (22) | passenger compartment side front strengthener | ** | - | 0,97 | G2 | - |
| (23) | chassis leg center | - | 17+18 | 2,15 | G2 | - |
| (24) | front block half-panel | - | 7+8+13+14 | 0,77 | G2 | - |
| (25) | chassis leg double crossmember | - | 11 | 0,97 | G2 | HLE |
(**): part number for part only
(*): parts not coated
(G2): both faces galvanised
(EZ2) both faces electro-zinc plated
(HLE) high strength steel
Right front block
| reference | designation | part number for part only | part number for part assembled with | thickness (mm) | trims | type |
|---|---|---|---|---|---|---|
| (1) | suspension mounting (right hand front) | - | 2+23+14 | 2,47 | G2 | HLE |
| (2) | wheel arch (right hand front) (joined parts) | - | 1+23+14 | before 1,17 - rear 0,77 | G2 | - |
| (3) | chassis leg-tunnel link | - | - | 1,17 | G2 | - |
| (4) | centre chassis leg upper stiffener | ** | - | 0,77 | G2 | - |
| (5) | chassis leg centre closing panel | ** | - | 1,47 | G2 | - |
| (6) | front chassis member | - | 9+10+26 | 1,47 | G2 | - |
| (7) | front block half-panel stiffener | - | 8+11+12 | 0,67 | G2 | - |
| (8) | front panel bracket | - | 7+11+12 | 1,17 | G2 | - |
| (9) | chassis leg link | - | 6+10 | 1,17 | G2 | - |
| (10) | chassis leg link closing panel | - | 6+9 | 0,67 | G2 | - |
| (11) | front block half-panel | - | 7+8+12 | 0,77 | G2 | - |
| (12) | bumper bracket (right hand front) | ** | 7+8+11 | 1,17 | G2 | - |
| (13) | chassis leg/sill link | ** | - | 1,17 | G2 | - |
| (14) | wheel arch gusset (right hand front) | ** | 1+2+23 | 0,97 | G2 | HLE |
| (15) | engine sub-frame front mounting support | - | 16 | 1,76 | G2 | - |
| (16) | chassis leg center | - | 15+18 | 2,15 | G2 | - |
| (17) | chassis leg rear closing panel | ** | - | 1,47 | G2 | HLE |
| (18) | chassis leg front partition | - | 16 | 0,97 | G2 | - |
| (19) | engine support | - | 20+25 | 2,44 | G2 | - |
| (20) | engine mounting side plate | - | 19+25 | 1,95 | G2 | - |
| (21) | front wing inner panel | ** | - | 0,97 | G2 | - |
| (22) | passenger compartment side front strengthener | ** | - | 0,97 | G2 | - |
| (23) | scuttle closing panel (front structure (*)) | - | 1+2+14 | 0,77 | G2 | - |
| (24) | scuttle closing panel (rear structure (*)) | ** | - | 0,67 | G2 | - |
| (25) | engine mounting stiffener | - | 19+20 | 1,95 | G2 | - |
| (26) | front towing eye | - | 6+9+10 | diameter 10 | * | - |
(**): part number for part only
(*): parts not coated
(G2): both faces galvanised
(EZ2): both faces electro-zinc plated
(HLE): high strength steel
Bulkead and scuttle assembly
| reference | designation | part number for part only | part number for part assembled with | thickness (mm) | trims | type |
|---|---|---|---|---|---|---|
| (1) | windscreen lower cross member inner panel | ** | 2+4+11 | 0,67 | G2 | - |
| (2) | windscreen wiper central support | - | 1+4+11 | 0,97 | G2 | - |
| (3) | instrument panel bracket | - | 6+10+12+13 | 0,67 | G2 | - |
| (4) | scuttle closing panel (rear structure (*1)) | ** | 1+2+4+11 | 0,67 | G2 | - |
| (5) | fascia crossmember stiffener | - | - | 1,47 | * | HLE |
| (6) | filter bracket deflector | - | 3+10+12+13 | 0,67 | * | - |
| (7) | windscreen aperture lower crossmember | ** | - | 0,67 | G2 | - |
| (8) | bulkhead crossmember | ** | - | 1,17 | G2 | - |
| (9) | accelerator pedal left-hand bracket | - | 14 | 1,76 | * | - |
| (10) | bulkhead stiffener | - | 3+6+12+13 | 0,67 | * | HLE |
| (11) | windscreen wiper LH support | - | 1+2+4 | 0,97 | * | HLE |
| (12) | instrument panel bracket | - | 3+6+10+13 | 2,50 | G2 | - |
| (13) | upper bulkhead | ** | 3+6+12+13 | 0,67 | * | - |
| (14) | lower bulkhead | ** | 9 | 0,77 | G2 | - |
(**): part number for part only
(*): parts not coated
(G2): both faces galvanised
(EZ2): both faces electro-zinc plated
(HLE): high strength steel
Front floor assembly
| reference | designation | part number for part only | part number for part assembled with | thickness (mm) | trims | type |
|---|---|---|---|---|---|---|
| (1) | RH interior sill | - | 2 | 0,97 | G2 | - |
| (2) | right outer front seat cushion rear support | ** | 1 | 1,47 | * | - |
| (3) | seat cushion mounting stiffener (right hand front) | - | 4 | 1,47 | * | - |
| (4) | right front seat crossmember | ** | 3 | 0,77 | * | - |
| (5) | front RH floor | - | - | 0,57 | G2 | - |
| (6) | front LH floor | - | - | 0,57 | G2 | - |
| (7) | RH rear side rail | - | - | 1,17 | G2 | - |
| (8) | tunnel bracket | - | 14+15 | 1,17 | G2 | - |
| (9) | chassis mleg LH rear | - | - | 1,17 | G2 | - |
| (10) | left front seat crossmember | ** | 12 | 0,77 | * | - |
| (11) | LH interior sill | - | 13 | 0,97 | G2 | - |
| (12) | seat cushion mounting stiffener (left hand front) | - | 10 | 1,47 | * | - |
| (13) | left outer front seat rear support | ** | 11 | 1,47 | * | - |
| (14) | tunnel | - | 15+8 | 1,47 | G2 | - |
| (15) | secondary brake fixing stiffener | - | 14+8 | 1,17 | * | - |
| (16) | left outer chassis leg | ** | - | 0,97 | G2 | - |
| (17) | right outer chassis leg | ** | - | 0,97 | G2 | - |
(**): part number for part only
(*): parts not coated
(G2): both faces galvanised
(EZ2): both faces electro-zinc plated
(HLE): high strength steel
Rear floor assembly
| reference | designation | part number for part only | part number for part assembled with | thickness (mm) | trims | type |
|---|---|---|---|---|---|---|
| (1) | passenger compartment side right rear lower closer | ** | - | 1,17 | G2 | - |
| (2) | tail lamp housing stiffener (on the right-hand side) | ** | - | 1,17 | * | - |
| (3) | inner rear panel | - | 29+30 | 0,97 | G2 | - |
| (4) | rear floor stiffener | - | - | 0,97 | * | - |
| (5) | front RH side member | ** | 8 | 1,76 | G2 | - |
| (6) | rear floor right centre crossmember stiffener | ** | - | 1,95 | G2 | HLE |
| (7) | rear seat right mounting stiffener | - | 9 | 1,47 | * | HLE |
| (8) | right front side member stiffener | - | 5 | 1,76 | G2 | HLE |
| (9) | rear floor panel | - | 7+21+ 23+24 | 0,57 | G2 | - |
| (10) | rear centre seat belt stiffener | - | - | 1,47 | * | - |
| (11) | spare wheel pannier right-hand bracket | - | - | 1,17 | G2 | - |
| (12) | flanged cross member | - | - | 0,97 | * | - |
| (13) | right intermediate side member | ** | - | 0,87 | G2 | HLE |
| (14) | left intermediate side member | ** | - | 0,87 | G2 | HLE |
| (15) | spare wheel pannier left-hand bracket | - | - | 1,17 | G2 | - |
| (16) | rear floor centre cross member | ** | - | 0,97 | G2 | - |
| (17) | left front side member stiffener | - | - | 1,76 | G2 | HLE |
| (18) | front LH side member | ** | - | 1,76 | G2 | - |
| (19) | crossmember closing panel | ** | - | 0,57 | G2 | - |
| (20) | rear floor left centre crossmember stiffener | ** | - | 1,95 | G2 | HLE |
| (21) | rear seat left mounting stiffener | - | 9 | 1,47 | * | HLE |
| (22) | LH rear side member | ** | - | 0,97 | G2 | HLE |
| (23) | bumper lower bracket (left hand rear) | - | 9 | 1,17 | G2 | - |
| (24) | bumper lower bracket (RH rear) | - | 9 | 0,97 | G2 | - |
| (25) | towing eye | - | 26 | diameter 10 | * | - |
| (26) | RH rear side member | - | 25 | 0,97 | G2 | HLE |
| (27) | passenger compartment bottom rear closer | ** | - | 1,17 | G2 | - |
| (28) | tail lamp housing stiffener (on the left-hand side) | ** | - | 1,17 | * | - |
| (29) | rear bumper upper support | ** | 3+30 | 1,17 | G2 | - |
| (30) | tail panel | - | 3+29 | 0,87 | G2 | - |
(**): part number for part only
(*): parts not coated
(G2): both faces galvanised
(EZ2): both faces electro-zinc plated
(HLE): high strength steel
LH or RH passagenger compartment side assembly - roof assembly
| reference | designation | part number for part only | part number for part assembled with | thickness (mm) | trims | type |
|---|---|---|---|---|---|---|
| (1) | roof panel | ** | - | 0,67 | * | - |
| (2) | front roof crossmember | ** | - | 0,67 | * | - |
| (3) | roof rear crossmember | ** | - | 1,17 | * | - |
| (4) | centre pillar stiffener | ** | - | 1,76 | * | - |
| (5) | windscreen finisher side bracket | ** | - | 0,67 | G2 | - |
| (6) | front pillar hinge upper stiffener | - | 7+8+9 | 1,47 | * | - |
| (7) | door pillar stiffener | - | 6+8+9 | 0,97 | * | - |
| (8) | front pillar hinge lower stiffener | ** | 6+7+9 | 1,47 | * | - |
| (9) | front pillar spacer | - | 6+7+8 | 0,97 | * | - |
| (10) | drip moulding seal support | ** | - | 0,67 | G2 | - |
| (11) | front inertia reel mounting stiffener | - | - | 1,95 | * | HLE |
| (12) | side panel | - | - | 0,67 | G2 | - |
| (13) | rear light outer housing | - | 14 | 0,67 | G2 | - |
| (14) | rear light inner housing | - | 13 | 0,87 | G2 | - |
| (15) | rear wing upper drip moulding | - | - | 0,77 | G2 | - |
| (16) | rear quarter panel upper stiffener | ** | - | 1,17 | * | - |
(**): part number for part only
(*): parts not coated
(G2): both faces galvanised
(EZ2): both faces electro-zinc plated
(HLE): high strength steel
LH or RH passenger compartment side inner panel assembly
| reference | designation | part number for part only | part number for part assembled with | thickness (mm) | trims | type |
|---|---|---|---|---|---|---|
| (1) | cantrail inner panel | ** | - | 1,17 | * | - |
| (2) | windscreen pillar gusset | ** | - | 0,97 | * | - |
| (3) | windscreen pillar inner panel | ** | - | 1,17 | * | - |
| (4) | rear wing inner panel | - | 10+15+16+17+18+19 | 0,67 | * | - |
| (5) | door stop yoke closing panel | - | - | 1,76 | * | HLE |
| (6) | sill closer extension | ** | - | 0,67 | G2 | - |
| (7) | front jacking point support | - | 8+9 | 2,44 | G2 | - |
| (8) | sill web | ** | 7+9 | 0,97 | G2 | - |
| (9) | rear jacking point support | - | 7+8 | 2,93 | * | - |
| (10) | rear wheel arch stiffener | - | 4+15+16+17+18+19 | 0,87 | G2 | - |
| (11) | "C" post inner panel | ** | - | 0,67 | G2 | - |
| (12) | rear wheel arch rear section | ** | 13+14 | 0,97 | G2 | - |
| (13) | rear bumper bracket | ** | 12+14 | 1,47 | G2 | - |
| (14) | rear wheelarch | - | 12+13 | 0,67 | G2 | - |
| (15) | rear recall mechanism mounting stiffener | - | 4+10+16+17+18+19 | 1,47 | * | HLE |
| (16) | jacking stiffener | - | 4+10+15+17+18+19 | 1,17 | * | HLE |
| (17) | rear back rest striker fixing plate | - | 4+10+15+16+18+19 | 1,47 | * | - |
| (18) | rear seat belt fastening stiffener | - | 4+10+15+16+17+19 | 1,47 | * | - |
| (19) | strut support | - | 4+10+15+16+17+18 | 2,50 | * | HLE |
| (20) | centre pillar inner panel | ** | - | 0,67 | * | - |
(**): part number for part only
(*): parts not coated
(G2): both faces galvanised
(EZ2): both faces electro-zinc plated
(HLE): high strength steel
Removable parts
| reference | designation | part number for part only | part number for part assembled with | thickness (mm) | trims | type |
|---|---|---|---|---|---|---|
| (1) | tailgate | - | 2 | 0,67 | EZ2 | HLE |
| (2) | tailgate inner panel | - | 1 | 0,57 | G2 | - |
| (3) | rear door inner panel | - | 7+8 | 0,67 | G2 | - |
| (4) | front door inner panel | - | 5+9+10+11 | 0,67 | G2 | - |
| (5) | door front upper stiffener | - | 4+9+10+11 | 0,67 | G2 | HLE |
| (6) | bonnet | - | 14 | 0,67 | EZ2 | - |
| (7) | rear door stiffener | - | 3+8 | 1,17 | * | HLE |
| (8) | rear door | ** | 3+7 | 0,67 | G2 | HLE |
| (9) | front door | ** | 4+5+10+11 | 0,67 | G2 | HLE |
| (10) | door side impact stiffener | - | 4+5+9+11 | 0,57 | * | - |
| (11) | front door stiffener | - | 4+5+9+10 | 1,17 | * | HLE |
| (12) | front wing | ** | 13 | 0,67 | G2 | - |
| (13) | front wing front bracket | - | 12 | 1,17 | G2 | - |
| (14) | bonnet inner panel | - | 6 | 0,67 | G2 | - |
(**): part number for part only
(*): parts not coated
(G2): both faces galvanised
(EZ2): both faces electro-zinc plated
(HLE): high strength steel