OVERHAUL
Note. Manufacturer does not recommend disassembling and servicing starters. If starter is found defective, a new unit must be installed.
| Application | Specification |
|---|
| Cranking Amperage Draw (1) | 150-280 Amps |
| No-Load Test At 11 Volts |
| Maximum Amps | (2) |
| Minimum RPM | (2) |
| Power Rating | 1.2 Kw |
| (1) With engine at normal operating temperature. High viscosity oil, extreme cold temperatures, or tight engine will increase amperage draw. (2) This specification for starter is not available from manufacturer. |
| (1) | With engine at normal operating temperature. High viscosity oil, extreme cold temperatures, or tight engine will increase amperage draw. |
| (2) | This specification for starter is not available from manufacturer. |
