TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Backing Plate-To-Rear Axle Bolts | 80 (109) |
| Bearing Retainer Mounting Bolt | 124 (168) |
| Brake Hose-To-Caliper Bolt | 35 (48) |
| Brake Tube-To-Fittings | 13 (17) |
| Caliper Bleed Screw | 15 (20) |
| Caliper Guide Pin Bolts | 30 (41) |
| Caliper-To-Steering Knuckle Bolts | 15 (20) |
| Master Cylinder-To-Power Brake Unit Nut | 21 (28) |
| Parking Brake Assembly Mounting Screws | 21 (28) |
| Power Brake Unit-To-Firewall Nut | 21 (28) |
| Rear Axle Hub Nut | 124 (168) |
| Wheel Lug Nuts | (1) 81-100 (110-135) |
| INCH Lbs. (N.m) |
| Brake Hose Bracket | 106 (12) |
| Brakelight Switch Bracket Screw | 71 (8) |
| Wheel Cylinder Bleed Screw | 89 (10) |
| Wheel Cylinder-To-Backing Plate Screws | 71 (8) |
| (1) Tighten nuts to half torque, then fully tighten to full torque in a crisscross sequence. |
| (1) | Tighten nuts to half torque, then fully tighten to full torque in a crisscross sequence. |
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Caliper Bore Diameter |
| Front | 2.35 (60) |
| Rear | 1.34 (34) |
| Disc |
| Diameter |
| Front | 11.1 (282) |
| Rear | 10.62 (270) |
| Lateral Runout | .002 (.05) |
| Parallelism | .0005 (.013) |
| Original Thickness |
| Front | .940-.950 (23.87-24.13) |
| Rear | .458-.478 (11.63-12.13) |
| Minimum Refinish Thickness (1) |
| Front | .882 (22.4) |
| Rear | .409 (10.4) |
| Discard Thickness |
| Front | .852 (21.64) |
| Rear | .379 (9.64) |
| Master Cylinder Bore & Stroke | 0.94 x 1.56 (23.8 x 39.5) |
| (1) Minimum refinish thickness is marked on disc. If different from indicated specification, use specification marked on disc. |
| (1) | Minimum refinish thickness is marked on disc. If different from indicated specification, use specification marked on disc. |
DISC BRAKE SPECIFICATIONS
DRUM BRAKE SPECIFICATIONS
| Application | In. (mm) |
|---|
| Drum |
| Original Diameter | 8.66 (220) |
| Maximum Refinish Diameter | (1) |
| Maximum Runout | .006 (.1524) |
| Rear Disc Internal Drum | 6.77-6.78 (171.90-172.15) |
| Master Cylinder Bore & Stroke | 0.94 x 1.56 (23.8 x 39.5) |
| Wheel Cylinder Diameter | .75 (19.05) |
| (1) Maximum refinish diameter is marked on drum. |
| (1) | Maximum refinish diameter is marked on drum. |
DRUM BRAKE SPECIFICATIONS
