Home/Chrysler/Fifth Avenue/Chrysler Fifth Avenue II (1990-1993)/Repair manual/Air Bag Restraint System/Volt-Ohmmeter Function

Contents

Section: Air Bag Restraint System

DESCRIPTION & OPERATION

AIR BAG LIGHT

IMPACT SENSORS

AIR BAG MODULE

AIR BAG SYSTEM DIAGNOSTIC MODULE (ASDM)

CLOCKSPRING

DIAGNOSTIC CONNECTOR

SERVICING

POST-COLLISION INSPECTION

CLOCKSPRING CENTERING

DEPLOYED AIR BAG CLEAN-UP

UNDEPLOYED AIR BAG

PROCEDURE 1: ELECTRONIC DEPLOYMENT WITH INTACT WIRING

PROCEDURE 2: REMOTE DEPLOYMENT OF AIR BAG

LEFT IMPACT SENSOR

Removal

Installation

Removal (Daytona & LeBaron)

Removal & Installation (Diplomat, Fifth Avenue & Gran Fury)

AIR BAG MODULE & STEERING WHEEL

TESTING - SYSTEM OPERATION CHECK

SERVICE PRECAUTIONS

DISABLING & ACTIVATING AIR BAG SYSTEM

DISABLING & ACTIVATING SYSTEM FOR REPAIRS

COMPLETE SYSTEM DEACTIVATION

WIRE REPAIR

REPAIRING BROKEN OR CUT WIRES

BLADE & SEALED PIN TERMINALS

PIN HEADER TERMINALS

REPLACING TERMINALS

TORQUE SPECIFICATIONS

DIAGNOSIS & TESTING

SELF-DIAGNOSTIC SYSTEM

Fault Codes

Stored Codes

Erase Stored Codes

Volt-Ohmmeter Function

PRETEST INSPECTION & DIAGNOSTIC PROCEDURE

Turn ignition to RUN position.

SYSTEM TESTING - DIAGNOSTIC CHARTS

All sections

Volt-Ohmmeter Function Chrysler Fifth Avenue II

Air Bag Restraint System

Volt-Ohmmeter Function

The volt-ohmmeter function can only be accessed after the SELECT TEST MODE. Volt-ohmmeter will not operate in the DISPLAY FAULT CODE or ERASE FAULT CODE mode.
To use, press VOLT/OHM key on keypad. DRB-II maintains previous test mode while in the volt-ohmmeter function. After all measurements have been made, press the VOLT/OHM key to return to previous test mode.