Power Distribution: Removal & Installation Chrysler Crossfire I

INSTALLATION

1. Install the engine fuse onto the studs.
2. Install the plate and the electrical lead to the engine fuse block.
3. Connect the negative battery cable.
4. Close the lid (1) to the engine fuse block.
5. Close the hood.

1. Install the relay control module harness connectors to the relay control module (1).
2. Install the relay control module into the control module box, pushing the relay control module down until the clips snap into place.
3. Install the control module box lid.
4. Connect the negative battery cable.

1. Install the harness connectors to the underhood accessory fuse block.
2. Push the underhood accessory fuse block down into the box until the rear tabs and the front two tabs (1) connect.
3. Install the lid.
4. Connect the negative battery cable.