CAPACITIES
| Application & Group | Cold Crank Amps @ 0°F (-18°C) | Amp Hr. Rating |
|---|
| 1.8L & 2.0L Group 86 | 430 | 50 |
| 2.2L & 3.0L Group 34 | 500 | 60 |
| 2.5L Group 34 | 600 | 66 |
| 3.3L & 3.5L (1) | 500-685 | 110-125 |
| (1) Group information is not available from manufacturer. |
| (1) | Group information is not available from manufacturer. |
FLUID CAPACITIES - 4-CYLINDER
| Application | Quantity |
|---|
| Crankcase (Includes Filter) |
| 1.8L | 4.1 Qts. (3.9L) |
| 2.0L |
| Non-Turbo | 4.6 Qts. (4.4L) |
| Turbo | 4.8 Qts. (4.5L) |
| 2.2L & 2.5L | 4.0 Qts. (3.8L) |
| Cooling System (Includes Heater) |
| 1.8L | 6.6 Qts. (6.2L) |
| 2.0L | 7.6 Qts. (7.2L) |
| 2.2L & 2.5L | 9.0 Qts. (8.5L) |
| Manual Transaxle |
| A-523 & A-568 (1) | (2) 4.6 Pts. (2.2L) |
| F5M22 (3) | (4) 3.8 Pts. (1.8L) |
| F5M33 (5) & W5M33 (6) | (4) 4.8 Pts. (2.3L) |
| Automatic Transaxle (Mopar ATF 7176) |
| 3-Speed |
| Except Fleet | 8.9 Qts. (8.4L) |
| Fleet | 9.2 Qts. (8.7L) |
| 4-Speed |
| F4A22 (3) | 6.4 Qts. (6.1L) |
| F4A33 (5) & W4A33 (6) | 7.4 Qts. (7.0L) |
| 41TE | 9.1 Qts. (8.6L) |
| (1) Used with high output turbo engine. (2) Use SAE 5W-30 engine oil. (3) Used with 1.8L and 2.0L non-turbo engines. (4) Use SAE 75W-90 or 75W-85/API GL-4. (5) Used with 2.0L turbo engine (FWD). (6) Used with 2.0L turbo engine (AWD). |
| (1) | Used with high output turbo engine. |
| (2) | Use SAE 5W-30 engine oil. |
| (3) | Used with 1.8L and 2.0L non-turbo engines. |
| (4) | Use SAE 75W-90 or 75W-85/API GL-4. |
| (5) | Used with 2.0L turbo engine (FWD). |
| (6) | Used with 2.0L turbo engine (AWD). |
FLUID CAPACITIES - 4-CYLINDER
FLUID CAPACITIES - V6
| Application | Quantity |
|---|
| Crankcase (Includes Filter) |
| 3.0L | 4.5 Qts. (4.3L) |
| 3.3L | 5.0 Qts. (4.7L) |
| 3.5L | 5.5 Qts. (5.2L) |
| Cooling System (Includes Heater) |
| 3.0L | 9.5 Qts. (9.0L) |
| 3.3L | 10.0 Qts. (9.5L) |
| 3.5L | 12.0 Qts. (11.4L) |
| Manual Transaxle (SAE 5W-30 Engine Oil) |
| A-543 | 4.6 Pts. (2.2L) |
| Automatic Transaxle (Mopar ATF 7176) |
| 3-Speed |
| Except Fleet | 8.8 Qts. (8.2L) |
| Fleet | 9.2 Qts. (8.7L) |
| 4-Speed |
| 41TE (1) | 9.1 Qts. (8.6L) |
| 42LE (2) | 9.9 Qts. (9.4L) |
| Differential (SAE 80W-90 Hypoid Gear) |
| 42LE (2) | 2.0 Pts. (0.9L) |
| (1) Used on all models except LH body. (2) Used on LH body. |
| (1) | Used on all models except LH body. |
COMPRESSION SPECIFICATIONS - 4-CYLINDER
| Application | Specification |
|---|
| Compression Ratio |
| 1.8L | 9.0:1 |
| 2.0L Non-Turbo | 9.0:1 |
| 2.0L Turbo | 7.8:1 |
| 2.2L (1) | 9.5:1 |
| 2.5L | 8.9:1 |
| Minimum Compression Pressure |
| 1.8L | (1) (2) 131 psi (9.2 kg/cm 2 |
| 2.0L Non-Turbo | (1) (2) 145 psi (10.2 kg/cm 2 ) |
| 2.0L Turbo | (1) (2) 121 psi (8.5 kg/cm 2 ) |
| 2.2L & 2.5L | (3) 100 psi (7.0 kg/cm 2 ) |
| (1) Engine speed at 250-400 RPM. (2) Maximum difference between each cylinder should not exceed 14 psi (.98 kg/cm 2 ). (3) Maximum difference between each cylinder should not exceed 25 percent. |
| (1) | Engine speed at 250-400 RPM. |
| (2) | Maximum difference between each cylinder should not exceed 14 psi (.98 kg/cm 2 ). |
| (3) | Maximum difference between each cylinder should not exceed 25 percent. |
COMPRESSION SPECIFICATIONS - 4-CYLINDER
COMPRESSION SPECIFICATIONS - V6
| Application | Specification |
|---|
| Compression Ratio |
| 3.0L | 8.9:1 |
| 3.3L | 8.9:1 |
| 3.5L | 10.45:1 |
| Minimum Compression Pressure |
| 3.0L | (1) 178 psi (12.5 kg/cm 2 ) |
| 3.3L | (1) 100 psi (7.0 kg/cm 2 ) |
| 3.5L | (1) 155-170 psi (10.9-12.0 kg/cm 2 ) |
| (1) Maximum difference between each cylinder should not exceed 25 percent. |
| (1) | Maximum difference between each cylinder should not exceed 25 percent. |
COMPRESSION SPECIFICATIONS - V6
SPARK PLUG SPECIFICATIONS - 4-CYLINDER
| Application | Champion No. |
|---|
| 1.8L & 2.0L Non-Turbo | RN9YC4 |
| 2.0L Turbo | RN9YC |
| 2.2L & 2.5L | RN12YC |
SPARK PLUG TYPE - 4-CYLINDER
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
|---|
| 1.8L & 2.0L Non-Turbo | .039-.043 (.99-1.09) | 15-21 (20-28) |
| 2.0L Turbo | .028-.031 (.71-.79) | 15-21 (20-28) |
| 2.2L & 2.5L | .035 (.89) | 20 (27) |
SPARK PLUG SPECIFICATIONS - 4-CYLINDER
SPARK PLUG SPECIFICATIONS - V6
| Application | Champion No. |
|---|
| 3.0L | RN11YC4 |
| 3.3L | RN14MC5 |
| 3.5L | RC12LYC5 |
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
|---|
| 3.0L | .041 (1.00) | 20 (27) |
| 3.3L & 3.5L | .048-.053 (1.22-1.35) | 20 (27) |
SPARK PLUG SPECIFICATIONS - V6
TPS VOLTAGE SPECIFICATIONS - 4-CYLINDER
| Application | Curb Idle (Volts) | Wide Open Throttle (Volts) |
|---|
| 1.8L & 2.0L | .48-.52 | (1) |
| 2.2L & 2.5L (2) | 1.0 | 4.0 |
| (1) Clockwise rotation of TPS increases output voltage. (2) On 2.5L flexible fuel engines, TPS is not adjustable. Specification listed may be used to check TPS calibration. |
| (1) | Clockwise rotation of TPS increases output voltage. |
| (2) | On 2.5L flexible fuel engines, TPS is not adjustable. Specification listed may be used to check TPS calibration. |
TPS VOLTAGE SPECIFICATIONS - 4-CYLINDER
TPS VOLTAGE SPECIFICATIONS - V6
| Application | Curb Idle (Volts) | Wide Open Throttle (Volts) |
|---|
| 3.0L | .5 | 3.5 |
| 3.3L & 3.5L (2) | .6 | 4.5 |
| (1) TPS is not adjustable. Specification listed may be used to check TPS calibration. (2) Measure voltage at TPS output (center) terminal. |
| (1) | TPS is not adjustable. Specification listed may be used to check TPS calibration. |
| (2) | Measure voltage at TPS output (center) terminal. |
TPS VOLTAGE SPECIFICATIONS - V6 (1)
